Corpus ID: 136876492

Brazing and soldering of metals

@inproceedings{Lashko1961BrazingAS,
  title={Brazing and soldering of metals},
  author={N. F. Lashko and Sofʹi︠a︡ Vasilʹevna Lashko-Avaki︠a︡n},
  year={1961}
}
Brazing and soldering of metals , Brazing and soldering of metals , مرکز فناوری اطلاعات و اطلاع رسانی کشاورزی 
Corrosion behaviour of silver brazing alloys in different environments
Corrosion data of the widely used silver brazing alloys (BAg‐1 and BAg‐3) of the American Welding Society’s (AWS) specification are scant in literature. Deals with the study of the corrosionExpand
Rapidly solidified low-silver brazing filler alloy foils
A rapidly solidified (RS) low-silver brazing alloy with 50% saving in silver has been developed as a potential substitute for the conventional Ag 72% — Cu 28% eutectic alloy. Major applications areExpand
New lead-free, Sn-Zn-In solder alloys
In view of the need for a lead-free, drop-in replacement for the widely used 40Pb-60Sn near-eutectic solder (m.p. ~183°C), new Sn-Zn-ln based alloys with substantially the same melting point haveExpand
Brazing of Mo and Nb using two active braze alloys
The brazing of molybdenum and niobium using two active braze alloys, 63Ag–35.25Cu–1.75Ti and 68.8Ag–26.7Cu–4.5Ti, has been extensively evaluated. Both infrared and traditional vacuum furnace brazingExpand
Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals
Abstract Titanium alloy (Ti–Al–V alloy) substrate was brazed with stainless steel (STS304) using filler metal. At an optimized brazing condition, various filler metals were used. Microstructures wereExpand
Brazing of Mo and Nb using two active braze alloys
Abstract The brazing of molybdenum and niobium using two active braze alloys, 63Ag–35.25Cu–1.75Ti and 68.8Ag–26.7Cu–4.5Ti, has been extensively evaluated. Both infrared and traditional vacuum furnaceExpand
Acid-assisted consolidation of powder compacts: cold-welding or cold sintering
Silver powder that has been treated in dilute fluoroboric acid solution and compacted at room temperature displays surprisingly elevated flexural and even tensile strength. The density and mechanicalExpand
Wetting behaviour of Cu–Ga alloys on 304L steel
Abstract In the present work, the wetting behaviour of the Cu–GaX (X = 10–30 wt.%) liquid alloys on 304L steel was investigated in vacuum at temperatures between 1123 and 1373 K. Contact angle andExpand
Effect of Ga on the Wettability of CuGa10 on 304L Steel
In the present work, the effect of Ga on the wetting behavior of the Cu-rich braze filler CuGa10 (wt pct, Cu90.8Ga9.2 at. pct) on the steel 304L was investigated. For this, the macroscopic andExpand