Biocompatible Magnetic Fluids of Co-Doped Iron Oxide Nanoparticles with Tunable Magnetic Properties

@article{Dutz2020BiocompatibleMF,
  title={Biocompatible Magnetic Fluids of Co-Doped Iron Oxide Nanoparticles with Tunable Magnetic Properties},
  author={Silvio Dutz and Norbert Buske and Joachim Landers and Christine Gr{\"a}fe and Heiko Wende and Joachim H. Clement},
  journal={Nanomaterials},
  year={2020},
  volume={10}
}
Magnetite (Fe3O4) particles with a diameter around 10 nm have a very low coercivity (Hc) and relative remnant magnetization (Mr/Ms), which is unfavorable for magnetic fluid hyperthermia. In contrast, cobalt ferrite (CoFe2O4) particles of the same size have a very high Hc and Mr/Ms, which is magnetically too hard to obtain suitable specific heating power (SHP) in hyperthermia. For the optimization of the magnetic properties, the Fe2+ ions of magnetite were substituted by Co2+ step by step, which… 

Ferrimagnetic Large Single Domain Iron Oxide Nanoparticles for Hyperthermia Applications

This paper describes the preparation and obtained magnetic properties of large single domain iron oxide nanoparticles. Such ferrimagnetic particles are particularly interesting for diagnostic and

Structural, magnetic and hyperthermia properties and their correlation in cobalt-doped magnetite nanoparticles

Cobalt doped magnetite nanoparticles (CoxFe3−xO4 NPs) are investigated extensively because of their potential hyperthermia application. However, the complex interrelation among chemical compositions

Structural perspective on revealing heat dissipation behavior of CoFe2O4-Pd nanohybrids: great promise for magnetic fluid hyperthermia.

The results provide insight into the utilization of CFO-Pd heterodimer suspensions as potential nanoplatforms for diagnostic and therapeutic biomedical applications, e.g., in cancer hyperthermia, cryopreserved tissue warming, thermoablative therapy, drug delivery and bioimaging.

Coating Effect on the 1H—NMR Relaxation Properties of Iron Oxide Magnetic Nanoparticles

A 1H Nuclear Magnetic Resonance (NMR) relaxometry experimental investigation of two series of magnetic nanoparticles showed that the investigated nanoparticles displayed a different approach to the saturation depending on the coatings, suggesting the possibility of slightly different local magnetic disorders induced by the presence of the various polyelectrolytes on the particles’ surface.

An Advanced Thermal Decomposition Method to Produce Magnetic Nanoparticles with Ultrahigh Heating Efficiency for Systemic Magnetic Hyperthermia.

Due to the limited heating efficiency of available magnetic nanoparticles, it is difficult to achieve therapeutic temperatures above 44 °C in relatively inaccessible tumors during magnetic

Heat dissipation in Sm3+ and Zn2+ co-substituted magnetite (Zn0.1SmxFe2.9-xO4) nanoparticles coated with citric acid and pluronic F127 for hyperthermia application

Results show that Sm3+ and Zn2+ co-substituted magnetite Zn0.1SmxFe2.9-xO4 nanoparticles are potential candidates for magnetic hyperthermia applications.

Structural and Opto-Magnetic Properties of Nickel Magnesium Copper Zircon Silicate Nano-Composite for Suppress the Spread of Foodborne Pathogenic bacteria

Nano-sized nickel magnesium copper zircon silicate (1MgO: 2CuO: 4SiO2: 2.3ZrO2:0.7 NiO) nanocomposite was prepared using sol-gel alkoxide precursors and calcined at 700 °C. The characterization for

The Use of MnCoFe2O4@GT@Cu Magnetic Nanoparticles in the Synthesis of Benzopyrans

Multi-component reactions (MCRs) are useful and powerful tools for the reduction of environmental pollution and the elimination of problematic intermediate steps in the synthesis of organic

References

SHOWING 1-10 OF 58 REFERENCES

Monodisperse cobalt ferrite nanomagnets with uniform silica coatings.

A route to create uniform silica shells around individual cobalt ferrite nanoparticles--which uses poly(acrylic acid) to bind to the nanoparticle surface and inhibit nanoparticle aggregation prior to the addition of a silica precursor--was developed.

Magnetic particle hyperthermia: nanoparticle magnetism and materials development for cancer therapy

Loss processes in magnetic nanoparticles are discussed with respect to optimization of the specific loss power (SLP) for application in tumour hyperthermia. Several types of magnetic iron oxide

Magnetic Nanoparticles for Biomedical Heating Applications

Summary In the past, magnetic nanoparticles have found increasing interest in different biomedical applications, e.g. the magnetic hyperthermia of tumor cells or the remote controlled drug delivery

Novel magnetic multicore nanoparticles designed for MPI and other biomedical applications: From synthesis to first in vivo studies

The new MCP introduced here have three times higher magnetic particle spectroscopy performance at lower and middle harmonics and five times higher MPS signal strength at higher harmonics compared with Resovist®, and the first in vivo MPI investigation of this new generation of magnetic nanoparticles is reported.

Hysteresis losses of magnetic nanoparticle powders in the single domain size range

Magnetic nanoparticles adapted for specific biomedical applications

It is demonstrated that tuning magnetic properties of MNPs can be obtained by the alteration of their structure, size, and size distribution by means of control of particle size during synthesis or subsequent size-dependent fractionation.

Cationic distribution and spin canting in CoFe2O4 nanoparticles

The results allow us to explain the high value of saturation magnetization and provide a better insight into the complex interplay between cationic distribution and magnetic disorder in ferrimagnetic nanoparticles.

Size and Chemistry Controlled Cobalt-Ferrite Nanoparticles and Their Anti-proliferative Effect against the MCF-7 Breast Cancer Cells.

A simple one-step, low temperature approach to produce crystalline, nanosized cobalt ferrites (CFO) with a size ∼4.7 nm is reported and their applicability in breast cancer treatment is demonstrated and they exhibit superparamagnetic character.
...