Beam screen issues

@article{Metral2010BeamSI,
  title={Beam screen issues},
  author={Elias M'etral},
  journal={arXiv: Accelerator Physics},
  year={2010}
}
  • E. M'etral
  • Published 8 August 2011
  • Physics
  • arXiv: Accelerator Physics
In the High Energy LHC (HE-LHC), a beam energy of about 16.5 TeV is currently contemplated. The beam screen issues linked to the use of 20 T dipole magnets instead of 8.33 T are discussed, with a particular emphasis on two mechanisms, the magneto-resistance and the anomalous skin effect, assuming the nominal machine and beam parameters. The magneto-resistance effect always leads to an increase of the material resistivity (as the mean free path in the presence of a transverse magnetic field… 

HTS-Coated Beam Screen for SPPC Bending Magnets

For studying new physics beyond the Standard Model, Supper proton-proton Collider (SPPC) with a circumfer-ence of 100 km and a centre mass energy of 100 TeV is proposed and under study in China. Due

Collective Effects in the Hadron Future Circular Collider

The instability of a beam in hadron circular accelerators due to the beam coupling impedance and electron clouds is investigated. The Future hadron-hadron Circular Collider (FCC-hh) is a potential

Magnetic frequency response of High-Luminosity Large Hadron Collider beam screens

Magnetic fields used to control particle beams in accelerators are usually controlled by regulating the electrical current of the power converters. In order to minimize lifetime degradation and

Low-impedance beam screen design for future hadron colliders

In future hadron colliders with collision energies greater than the energy of the Large Hadron Collider (LHC), the beamscreen becomes an increasingly important source of beam coupling impedance. This

Stability limits with Landau damping in the FCC-hh

The resistive wall impedance is one of the expected main drivers of transverse beam instabilities in the proposed Future Circular Collider hadron-hadron option (FCC-hh). We obtain the resistive wall

HTS Coatings for Impedance Reduction in Particle Accelerators: Case Study for the FCC at CERN

  • S. Calatroni
  • Physics
    IEEE Transactions on Applied Superconductivity
  • 2016
The FCC-hh presently under study at the European Organization for Nuclear Research (CERN) will make use of 16-T superconducting dipoles for achieving 100 TeV p-p center-of-mass collision energy in a

Challenges for Highest Energy Circular Colliders

A new tunnel of 80–100 km circumference could host a 100 TeV centre-of-mass energy-frontier proton collider (FCC-hh/VHE-LHC), with a circular lepton collider (FCCee/TLEP) as potential intermediate

A Mathematica Notebook for the calculation of the anomalous skin effect in copper

This Mathematica Notebook allows calculating the RF surface impedance of copper, in the normal and anomalous skin effect regimes, for any value of frequency, temperature and magnetic field (thus

Design of the future circular hadron collider beam vacuum chamber

The optimized vacuum chamber for a future higher-energy hadron collider minimizes electron cloud build-up, outgassing from synchrotron radiation, and heat leakage to the cold mass of the

Summary of session 3 on synchrotron radiation and beam dynamics

We summarize presentations, discussions and general conclusions of the Workshop session on 'Beam Dynamics Issues'. Major subjects include effects due to synchrotron radiation (SR), cryogenic loads,

References

SHOWING 1-10 OF 14 REFERENCES

Anomalous Skin Effect and Resistive Wall Heating

The present design of the beam screen of the LHC calls for a stainless steel pipe with a thin copper layer (about 50 m thick) coated on its inner surface. The purpose of the copper coating is to

Surface Resistance Measurements and Estimate of the Beam-Induced Resistive Wall Heating of the LHC Dipole Beam Screen

An estimate of the resistive losses in the LHC beam screen is given from cold surface resistance measurements using the shielded pair technique, with particular emphasis on the effect of a high

Beam Vacuum Chamber Effects It the CERN Large Hadron Collider

  • L. Vos
  • Physics
    IEEE Transactions on Nuclear Science
  • 1985
The vacuum chamber of the Large Hadron Collider (LHC) which could be installed above LEP in the LEP tunnel, would be maintained at liquid helium temperature. The power losses from the beam induced

Single beam collective effects in the LHC

Single-beam collective effects can limit the current and therefore the performance of the Large Hadron Collider (LHC), unless the impedance of the different vacuum chamber discontinuities seen by the

SURFACE RESISTANCE MEASUREMENTS OF LHC DIPOLE BEAM SCREEN SAMPLES

An estimate of the resistive losses in the LHC dipole beam screen is given from cold surface resistance measurements using the shielded pair technique. Several beam screen samples have been

Theory of the Anomalous Skin Effect in Metals

PIPPARD1 has recently made an experimental and theoretical study of the skin effect in metals at high frequencies, in which he showed that the usual theory of the effect is no longer valid at low

Transverse instabilities for multiple nonrigid bunches in a storage ring.

  • BergRuth
  • Physics
    Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics
  • 1995
TLDR
A method for determining the stability of a system consisting of several highly relativistic bunches of charged particles circulating in a storage ring, which includes coupling between multibunch modes with one type of internal motion.

Physics Of Collective Beam Instabilities In High Energy Accelerators

Wake Fields and Impedances. Instabilities in Linear Accelerators. Macroparticle Models. Landau Damping. Perturbation Formalism. Index.

The theory of the anomalous skin effect in metals

  • A. N. GordonE. Sondheimer
  • Physics
    Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
  • 1948
SummaryA simple method is described for obtaining series expansions for the integrals which represent the surface impedance in the theory of the anomalous skin effect in metals. The results agree