• Corpus ID: 212544185

BEHAVIOUR OF REINFORCED CONCRETE FRAME WITH IN-FILL WALLS UNDER SEISMIC LOADS USING ETABS

@inproceedings{Etabs2014BEHAVIOUROR,
  title={BEHAVIOUR OF REINFORCED CONCRETE FRAME WITH IN-FILL WALLS UNDER SEISMIC LOADS USING ETABS},
  author={Etabs and Shaharban},
  year={2014}
}
Reinforced concrete framed buildings with in-fills are usually analyzed as bare frame, without considering the strength and stiffness contributions of the in-fills. However during wind and earthquake these infill walls contribute some response of the structure. Masonry Brick infill walls have been used in Reinforced concrete Frame structures as interior and exterior partition walls. Since they are usually considered as nonstructural elements their interaction with the bonding frame is ignored… 

Figures from this paper

References

SHOWING 1-10 OF 15 REFERENCES
Study the Reinforced Concrete Frame with Brick Masonry Infill due to Lateral Loads
In the building construction, framed structures are frequently used due to ease of construction and rapid progress of work. Masonry infill panels have been widely used as interior and exterior
Seismic Analysis of RC Frame Structure with and without Masonry Infill Walls.
Masonry infills are normally considered as non-structural elements and their stiffness contributions are generally ignored in practice, such an approach can lead to an unsafe design. The masonry
Dynamic and Pushover Analysis of Three Dimensional Models of Buildings for Rigid Floor Diaphragm Idealization using ETAB
  • International Journal of Civil Engineering & Technology (IJCIET),
  • 2014
2011Experimental study on seismic strengthening of reinforced concrete frames by precast concrete panels under seismic loading, ACI Structural Journal, vol.108
  • Title no.23,
  • 2011
Earthquake Resistant Design of Structures, Eight Edition, PHI Learning Private Ltd
  • 2010
Earthquake Resistant Design of Structures, Eight Edition, PHI Learning Private Ltd, New Delhi
  • 2010
Behaviour of reinforced concrete frames in filled with lightweight materials under seismic loads
  • Structural Engineering Research Journal, Indonesia
  • 2009
Seismic Reliability analysis of RCC building frame
  • International Journal of Earth Sciences and Engineering
  • 2006
Seismic Reliability analysis of RCC building frame, International Journal of Earth Sciences and Engineering ,Title
  • 2006
and Dr . Ajeet Kumar Rai , “ Dynamic and Pushover Analysis of Three Dimensional Models of Buildings for Rigid Floor Diaphragm Idealization using ETAB
  • International Journal of Earth Sciences and Engineering , Title no . 0974
  • 2006
...
1
2
...