Corpus ID: 13538990

Automation based power transmission control Station using PLC and SCADA

@inproceedings{Vignesh2015AutomationBP,
  title={Automation based power transmission control Station using PLC and SCADA},
  author={T. Vignesh and J. Kirubakaran},
  year={2015}
}
Power management is an important constraint in the design of various loads in industries for automation. So if power consumption increases then the substation monitoring is very important for the purpose of controlling the hardware and software optimization with the help of PLC ladder logic system and SCADA were used. This technique in order to reach strong conclusion about their actual impact on the power grid monitoring and control without manpower. The basic idea behind substation control… Expand
Global Journal of Advance Engineering Technologies and Sciences PERFORMANCE OF A SCADA SYSTEM FOR LARGE DISTRIBUTION NETWORK TRANSACTIONS ON POWER SYSTEMS
SCADA refers to the centralized systems that control and monitor the entire sites, or they are the complex systems spread out over large areas. Nearly all the control actions are automaticallyExpand
Smart Transmit abnormal Condition in High Voltage Substation by SCADA System between Protection Equipment’s and National Control Center
TLDR
This paper will discuss Supervisory Control and Data Acquisition (SCADA), where the accuracy meaning is a control system with applications in managing large-scale for industrial operations. Expand
WORKING PHASES OF SCADA SYSTEMFOR POWER DISTRIBUTIONNETWORKS
TLDR
The aim of this paper is to recall the basic concepts of SCADA, to present the project management phases ofSCADA for real time implementation, and to show the need of the automation for Power Distribution Companies (PDC) on their distribution networks and the importance of using computer based system towards sustainable development of their services. Expand
Industrial Automation using Modern Controls, Monitoring, Data Logging and Development of Training Facility in College
Industrial automation (IA), decreases the need for human sensory, human energy and cost. Now a day’s as per the industrial requirement, the highly growth in the sensors, control and automationExpand
Rancang Bangun Simulator Sistem SCADA (Supervisory Control And Data Acquisition) Pada Gardu Induk Rawalo
Dengan perkembangan teknologi sekarang ini untuk mengontrol dan memonitoring peralatan-peralatan di gardu induk yang lokasinya berjauhan dapat dilakukan dalam satu tempat ruang kontrol denganExpand

References

SHOWING 1-9 OF 9 REFERENCES
PLC SCADA based Distribution Monitoring & Control
TLDR
Main concept of the paper is data acquisition & controlling by using SCADA software PLC, which is a medium between electrical system & Personal Computer for SCADA to take input and output bits. Expand
Generation of Electricity by Renewable Energy Sources & Transmission of Energy Production Units using PLC & SCADA
Automation means Delegation of human control to machine. A PLC (Programmable Logic Controller) is a device that was invented to replace the necessary sequential relay circuits for machine control. AExpand
Using Substation Automation System for Faults Management and Analysis in Electric Power Distribution Systems in Nigeria
The need to evolve an indigenous solution on fault management and analysis in Electric Power Distribution System (EPDS) informed this research work on using Substation Automation for real-time faultExpand
Automated fault isolation system on low voltage distribution automation system
  • M.M. Ahmed, W. L. Soo
  • Engineering
  • 2008 IEEE/PES Transmission and Distribution Conference and Exposition
  • 2008
This automated fault isolation system was integrated into the customer side distribution system of 415/240V by using the Tenaga Nasional Berhad (TNB) distribution system. Supervisory control and dataExpand
Novel automated fault isolation system on low voltage distribution automation system
This novel automated fault isolation system has been developed and integrated into a new customer side distribution system of 415/240V. The distribution system is based on the Tenaga Nasional BerhadExpand
Design And Implementation Of SCADA System Based Power Distribution For Primary Substation
  • International Journal of Electronics and Computer Science Engineering
Electronics and Instrumentation Engineering " Working Phases of SCADA System for Power Distribution Networks
  • Shalini1 Sunil Kumar J2 Birtukan Teshome3 Samrawit Bitewlgn Muluneh4 Bitseat Tadesse Aragaw5
International Journal of Advanced Research in Computer Engineering & Technology
  • International Journal of Advanced Research in Computer Engineering & Technology
[ 6 ] ” Novel Automated Fault Isolation System on Low Voltage Distribution Automation System ”
  • Musse Ahmed