Automatic Control for Variable Ratio Frequency Converters

@article{Shively1932AutomaticCF,
  title={Automatic Control for Variable Ratio Frequency Converters},
  author={E. Shively and G. S. Whitlow},
  journal={Transactions of the American Institute of Electrical Engineers},
  year={1932},
  volume={51},
  pages={121-127}
}
  • E. Shively, G. S. Whitlow
  • Published 1 November 1931
  • Engineering
  • Transactions of the American Institute of Electrical Engineers
An automatic switching equipment for the control of two 20,000-kw. frequency changer sets using the Scherbius method of load and power factor control has been in successful operation at the Page Avenue station of the Union Electric Light and Power Company of St. Louis, for almost a year. This equipment contains several new features in the automatic control of machines of this type. Besides being the first completely automatic switching equipment applied to machines of this type, it is unique in… Expand
4 Citations
Interconnection of the 25-and 60-Cycle System of the Union Electric Light and Power Company
FREQUENCY conversion was determined as the best means of supplying differences between the 25-cycle and 60-cycle loads and generating abilities of the Union Electric Light and Power Company system.Expand
Generation of Wind Power using Doubly Fed Induction Generator
Due to independent controlling mechanism for the active and reactive power, doubly fed induction generator (DFIG) is still culled by the wind turbine companies. The control strategies areExpand
The frequency changer era-interconnecting systems of varying cycles
At the start of the 20th century, the five different frequencies of 25, 30, 40, 50, and 60 cycles were in use, to a greater or lesser degree, in the United States. There was also a smattering ofExpand
The Keokuk story [history]
  • T. Blalock
  • Engineering
  • IEEE Power and Energy Magazine
  • 2009
From 1910 to 1913, construction was under way on a huge hydroelectric complex on the Mississippi River at Keokuk, Iowa. Located at the foot of the Des Moines Rapids, the project included a dam thatExpand

References

SHOWING 1-4 OF 4 REFERENCES
A 40,000-Kw. Variable-Ratio Frequency Converter Installation
Part I of this paper describes the installation of two 20,000-kw., adjustable load, variable-ratio, frequency converters interconnecting the 25-cycle and the 60-cycle systems of the Niagara, LockportExpand
Theory of Speed and Power Factor Control of Large Induction Motors by Neutralized Polyphase Alternating-Current Commutator Machines
  • J. I. Hull
  • Engineering
  • Transactions of the American Institute of Electrical Engineers
  • 1920
Theory of induction motor control, discussing singlerange (below synchronism only) speed and power factor control by means of a constant-speed series commutator motor, by means of a constant-speedExpand
Automatic regulation of synchronous condensers: Equipped with superspeed excitation
This paper describes extensive field tests made on the super-high-speed excitation equipment used with the 30,000-kv-a. synchronous condensers at the Plymouth Meeting Substation of the PhiladelphiaExpand
Application of Large Frequency Converters to Power Systems
  • E. J. Burnham
  • Computer Science
  • Transactions of the American Institute of Electrical Engineers
  • 1928