Atomic weights of the elements 2013 (IUPAC Technical Report)

@article{Meija2016AtomicWO,
  title={Atomic weights of the elements 2013 (IUPAC Technical Report)},
  author={Juris Meija and Tyler B. Coplen and Michael Berglund and Willi A. Brand and Paul De Bi{\'e}vre and Manfred Gr{\"o}ning and Norman E. Holden and Johanna Irrgeher and Robert D. Loss and Thomas Walczyk and Thomas Prohaska},
  journal={Pure and Applied Chemistry},
  year={2016},
  volume={88},
  pages={265 - 291}
}
Abstract The biennial review of atomic-weight determinations and other cognate data has resulted in changes for the standard atomic weights of 19 elements. The standard atomic weights of four elements have been revised based on recent determinations of isotopic abundances in natural terrestrial materials: cadmium to 112.414(4) from 112.411(8), molybdenum to 95.95(1) from 95.96(2), selenium to 78.971(8) from 78.96(3), and thorium to 232.0377(4) from 232.038 06(2). The Commission on Isotopic… Expand
Clarifying Atomic Weights: A 2016 Four-Figure Table of Standard and Conventional Atomic Weights.
To indicate that atomic weights of many elements are not constants of nature, in 2009 and 2011 the Commission on Isotopic Abundances and Atomic Weights (CIAAW) of the International Union of Pure andExpand
Isotope-abundance variations and atomic weights of selected elements: 2016 (IUPAC Technical Report)
Abstract There are 63 chemical elements that have two or more isotopes that are used to determine their standard atomic weights. The isotopic abundances and atomic weights of these elements can varyExpand
Variation of lead isotopic composition and atomic weight in terrestrial materials (IUPAC Technical Report)
Abstract The isotopic composition and atomic weight of lead are variable in terrestrial materials because its three heaviest stable isotopes are stable end-products of the radioactive decay ofExpand
Interpretation and use of standard atomic weights (IUPAC Technical Report)
Abstract Many calculations for science or trade require the evaluation and propagation of measurement uncertainty. Although relative atomic masses (standard atomic weights) of elements in normalExpand
Interpreting and propagating the uncertainty of the standard atomic weights (IUPAC Technical Report)
Abstract In 2009, the Commission on Isotopic Abundances and Atomic Weights (CIAAW) of the International Union of Pure and Applied Chemistry (IUPAC) introduced the interval notation to express theExpand
Magnesium Isotope Geochemistry
Magnesium (Mg) has an atomic number of 12 and belongs to the alkaline earth element (Group II) of the Periodic Table. The pure Mg is a silvery white metal and has a melting point of 650 °C andExpand
Isotopic compositions of the elements 2013 (IUPAC Technical Report)
Abstract The Commission on Isotopic Abundances and Atomic Weights (ciaaw.org) of the International Union of Pure and Applied Chemistry (iupac.org) has revised the Table of Isotopic Compositions ofExpand
Accurate Determination of the Absolute Isotopic Composition and Atomic Weight of Molybdenum by Multiple Collector Inductively Coupled Plasma Mass Spectrometry with a Fully Calibrated Strategy.
TLDR
A fully calibrated strategy has been investigated for the first time for the accurate determination of absolute isotopic composition and atomic weight of molybdenum using multiple-collector inductively coupled plasma mass spectrometry and the relationship between mass of isotope and bias per mass unit β was investigated. Expand
Determination of the isotopic composition of lutetium using MC-ICPMS
TLDR
The first independent measurements of lutetium isotopic composition using multi-collector ICPMS in four commercial lUTetium materials, including a new NRC candidate lutetic isotopic reference material, LUIS-1, are reported. Expand
IUPAC-IUGS status report on the half-lives of 238U, 235U and 234U
Abstract The current state of knowledge on the half-lives of the long-lived U radionuclides has been reviewed by the IUPAC-IUGS joint Task Group “Isotopes in Geosciences”. 238 U is assigned aExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 59 REFERENCES
Atomic weights of the elements 2005 (IUPAC Technical Report)
The latest evaluation of atomic weight determinations and other cognate data has warranted 16 changes for the standard atomic weights of the elements, Ar(E), from those published previously in theExpand
Isotope-abundance variations of selected elements (IUPAC Technical Report)
Documented variations in the isotopic compositions of some chemical elements are responsible for expanded uncertainties in the standard atomic weights published by the Commission on Atomic WeightsExpand
Isotopic compositions of the elements 2009 (IUPAC Technical Report)
The Commission on Isotopic Abundances and Atomic Weights (CIAAW) of the International Union of Pure and Applied Chemistry (IUPAC) completed its last update of the isotopic compositions of theExpand
History of the recommended atomic-weight values from 1882 to 1997: A comparison of differences from current values to the estimated uncertainties of earlier values (Technical Report)
International commissions and national committees for atomic weights (mean relative atomic masses) have recommended regularly updated, best values for these atomic weights as applicable toExpand
Assessment of international reference materials for isotope-ratio analysis (IUPAC Technical Report)
Abstract Since the early 1950s, the number of international measurement standards for anchoring stable isotope delta scales has mushroomed from 3 to more than 30, expanding to more than 25 chemicalExpand
Isotopic compositions of the elements 1997 (Technical Report)
Republication or reproduction of this report or its storage and/or dissemination by electronic means is permitted without the need for formal IUPAC permission on condition that an acknowledgement,Expand
Absolute Isotopic Abundance Ratio and the Atomic Weight of Bromine.
TLDR
The indicated uncertainties are overall limits of error based on 95 percent confidence limits for the mean and allowances for the effects of known sources of possible systematic error plus a component to cover possible natural variations in isotopic composition although no provable variations were noted among the commercial and natural samples. Expand
ABSOLUTE ISOTOPIC SCALE FOR DEUTERIUM ANALYSIS OF NATURAL WATERS. ABSOLUTE D/H RATIO FOR SMOW.
The absolute isotopic ratios of the hydrogen content of two reference water standards called “SMOW” 2 and “SLAP 3 were measured to define an absolute isotopic scale. This isotopic scale can be usedExpand
The AME2012 atomic mass evaluation (II). Tables, graphs and references
This paper is the second part of the new evaluation of atomic masses, Ame2012. From the results of a least-squares calculation, described in Part I, for all accepted experimental data, we derive hereExpand
High precision 230Th and 232Th in the Norwegian Sea and Denmark by thermal ionization mass spectrometry
Seawater samples (1–2 liters) were collected from the Norwegian Sea and Denmark Strait and analyzed for 230Th and 232Th using highly sensitive thermal ionization mass spectrometry (TIMS). DepthExpand
...
1
2
3
4
5
...