Applying LCC Compensation Network to Dynamic Wireless EV Charging System

  title={Applying LCC Compensation Network to Dynamic Wireless EV Charging System},
  author={Qingwei Zhu and Lifang Wang and Yanjie Guo and Chenglin Liao and Fang Li},
  journal={IEEE Transactions on Industrial Electronics},
Based on the wireless power transfer (WPT) technology, dynamic wireless charging of electric vehicle (EV) is gaining increasing attentions because it promotes the popularization of EV and also serves a new form of clean transportation. In this paper, we introduce the LCC compensation network to WPT system oriented for dynamic wireless EV charging application. First, characteristics of symmetrical T-type network, which is the origin of the favorable LCC compensation network, are summarized. Then… Expand
Neighboring Effects on the Deactivated Inverter in a Segmented Dynamic Wireless EV Charging System
In practical dynamic wireless electric vehicle (EV) charging (DWEVC) applications, the wireless charging roadway is often split into short individually controllable segments; only those segmentsExpand
Reserch on Dynamic Wireless Charging of Electric Vehicle Based on Double LCC Compensation Mode
Through mathematical modeling and simulation analysis, the double LCC compensation mode not only has constant current output characteristics, but also has stronger stability for the dynamic wireless charging system of electric vehicles. Expand
Interoperability Analysis and Improvement of Wireless Charging System for Electric Vehicle Application with Different Compensation Networks
On the basis of the original topology, a DC/DC converter is added to improve the interoperability, so that the performance of wireless charging system interoperability won’t change significantly. Expand
Efficiency Optimization for Wireless Dynamic Charging System With Overlapped DD Coil Arrays
Wireless dynamic charging is one of the most promising power supply methods for electric vehicles (EVs), which can reduce battery volume and extend EVs’ range. Stable output power and high systemExpand
A simulation study on four different compensation topologies in EV wireless charging
This article aims to give a comprehensive explanation of wireless power transfer fundamentals by simulating different tuning topologies for less inductance leakage in SIMULINK/Matlab software. Expand
Design of crossed DD coil for dynamic wireless charging of electric vehicles
The technology of dynamic Wireless Power Transfer (WPT) has a broad application prospect in Electrical Vehicle (EV). Recently, the DD type has been proposed as the EV's charging magnetic couplerExpand
A Three-Phase Dynamic Wireless Charging System with Constant Output Voltage
A dynamic wireless power transfer (WPT) system is an effective method, which can reduce charging time and extend the driving range of the electric vehicles. In the dynamic WPT systems, the outputExpand
A Fast Construction Method of Resonance Compensation Network for Electric Vehicle Wireless Charging System
A fast and accurate tuning technique based on a double-sided L3C compensation network with a capacitor matrix that makes the system resonate rapidly and maintain stability, and the inverter is also easy to implement zero-voltage switching. Expand
Design of a High Power, LCC-Compensated, Dynamic, Wireless Electric Vehicle Charging System with Improved Misalignment Tolerance
The proposed DWPT EV charging system operates at an average power transfer efficiency that is higher than 90% and provides good lateral misalignment tolerance up to ±200 mm, including EV specifications, inductive link and compensation network design and power electronic circuitry. Expand
A review of recent trends in wireless power transfer technology and its applications in electric vehicle wireless charging
This paper presents a comprehensive overview of recent trends in WPT technologies and applications to wireless charging of EVs, including stationary and dynamic wireless charging, and proposes methods for EMF shielding. Expand


A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
With the proposed topology and its tuning method, the resonant frequency is irrelevant with the coupling coefficient between the two coils and is also independent of the load condition, which means that the system can work at a constant switching frequency. Expand
Integrated ${LCC} $ Compensation Topology for Wireless Charger in Electric and Plug-in Electric Vehicles
The proposed topology will reduce the size of the additional coil and make the system more compact with extremely high efficiency and three categories of operation modes are presented and analyzed. Expand
Wireless Power Transfer for Electric Vehicle Applications
  • Siqi Li, C. Mi
  • Engineering
  • IEEE Journal of Emerging and Selected Topics in Power Electronics
  • 2015
Wireless power transfer (WPT) using magnetic resonance is the technology which could set human free from the annoying wires. In fact, the WPT adopts the same basic theory which has already beenExpand
A novel wireless power transfer for in-motion EV/PHEV charging
Wireless power transfer (WPT) is a convenient, safe, and autonomous means for electric and plug-in hybrid electric vehicle charging that has seen rapid growth in recent years for stationaryExpand
The Optimal System Design of the Online Electric Vehicle Utilizing Wireless Power Transmission Technology
  • Young Dae Ko, Y. Jang
  • Engineering, Computer Science
  • IEEE Transactions on Intelligent Transportation Systems
  • 2013
A mathematical model and an optimization method to allocate economically the power transmitters and to determine the battery capacity of the OLEV-based mass transportation system are presented and the particle swarm optimization (PSO) algorithm is used as the solution method for the optimization problem. Expand
ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer Application
A new compensation-circuit design procedure is proposed that considers high-order current harmonics and results in inverter zero-current switching and is compared with the classical compensation designed for zero phase angle between the inverter voltage and current fundamental components. Expand
A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power
Wireless power transfer (WPT) is an emerging technology with an increasing number of potential applications to transfer power from a transmitter to a mobile receiver over a relatively large air gap.Expand
Economic Analysis of the Dynamic Charging Electric Vehicle
A wireless charging or inductive charging electric vehicle (EV) is a type of EVs with a battery that is charged from a charging infrastructure, using a wireless power transfer technology. WirelessExpand
Demonstrating Dynamic Wireless Charging of an Electric Vehicle: The Benefit of Electrochemical Capacitor Smoothing
The wireless charging of an electric vehicle (EV) while it is in motion presents challenges in terms of low-latency communications for roadway coil excitation sequencing and maintenance of lateralExpand
An Optimized Track Length in Roadway Inductive Power Transfer Systems
Application of inductive power transfer (IPT) to electric vehicles moving along the road can provide more charging flexibility with the reduction of weight and size of charge-storage batteriesExpand