Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

@article{Agnelli2015ApplicationOT,
  title={Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise},
  author={Silvia Agnelli and Francesco Baldi and Bamber R. K. Blackman and Leonardo Castellani and Patricia Maria Frontini and L. Laiarinandrasana and Alessandro Pegoretti and Marta Rink and A. Salazar and H. A. Visser},
  journal={Polymer Testing},
  year={2015},
  volume={44},
  pages={72-81}
}

Figures and Tables from this paper

Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience
Round-robin (RR) tests carried out under the direction of the Technical Committee 4, “Polymers, Polymer Composites and Adhesives,” of the European Structural Integrity Society (ESIS TC4) showed that
Application of J Integral for the Fracture Assessment of Welded Polymeric Components
For many demanding applications of engineering plastics, fracture behaviour under various loading conditions is of prime practical importance. It is well known that fracture properties of plastics
Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers
TLDR
A polymeric material with an elastic plastic deformation behavior (ABS, acrylonitrile butadiene styrene) is investigated with regard to the influence of constraint and specimen size and it was found that J0.2 and Jbl could be used as crack initiation parameters whereby Jini and JI,lim are indicative of the onset of stable crack growth.
Size scaling of strength and toughness for 3D printed polymer specimens
Bell, Darren T. M.S.M.E., Purdue University, December 2016. Scaling of Strength and Toughness for 3D Printed Polymer Specimens. Major Professor: Thomas H. Siegmund, School of Mechanical Engineering.
D-printed polymers exhibit a strength size e ff ect
This study is an investigation on the size dependence of strength of a 3D printed acrylic polymer. 3D printed beams are used in three-point bend fracture experiments. Three print modes of the PolyJet
...
1
2
...

References

SHOWING 1-10 OF 21 REFERENCES
The use of load separation criterion and normalization method in ductile fracture characterization of thermoplastic polymers
Load separation is the theoretical basis for the single-specimen J-integral experiment and the incremental calculation of J-integral crack growth resistance (J-R) curves. This criterion has been
On the applicability of the load separation criterion in determining the fracture resistance (JIc) of ductile polymers at low and high loading rates
In this work, the applicability of a procedure based on the load separation criterion in determining the fracture resistance (JIc) of a rubber modified polyamide 66 (PA66) was analyzed and discussed.
The load separation criterion and methodology in ductile fracture mechanics
The objective of this paper is to investigate the implications of the load separation criterion for evaluating ductile fracture mechanics parameters. This criterion allows the load to be represented
J-Fracture toughness of polymers at slow speed
...
1
2
3
...