Application of a Coated Film Catalyst Layer Model to a High Temperature Polymer Electrolyte Membrane Fuel Cell with Low Catalyst Loading Produced by Reactive Spray Deposition Technology

@inproceedings{Myles2015ApplicationOA,
  title={Application of a Coated Film Catalyst Layer Model to a High Temperature Polymer Electrolyte Membrane Fuel Cell with Low Catalyst Loading Produced by Reactive Spray Deposition Technology},
  author={Timothy D. Myles and Siwon Kim and Radenka Maric and William E Mustain},
  year={2015}
}
In this study, a semi-empirical model is presented that correlates to previously obtained experimental overpotential data for a high temperature polymer electrolyte membrane fuel cell (HT-PEMFC). The goal is to reinforce the understanding of the performance of the cell from a modeling perspective. The HT-PEMFC membrane electrode assemblies (MEAs) were constructed utilizing an 85 wt. % phosphoric acid doped Advent TPS® membranes for the electrolyte and gas diffusion electrodes (GDEs… CONTINUE READING
2 Citations
76 References
Similar Papers

References

Publications referenced by this paper.
Showing 1-10 of 76 references

The Effect of Binder Content on the Performance of a High Temperature Polymer Electrolyte Membrane Fuel Cell Produced with Reactive Spray Deposition Technology. Electrochim

  • S. Kim, T. D. Myles, H. R. Kunz, D. Kwak, Y. Wang, R. Maric
  • Catalysts
  • 2015
Highly Influential
11 Excerpts

A Cell Voltage Equation for an Intermediate Temperature Proton Exchange Membrane

  • K. Scott, M. Mamlouk
  • Fuel Cell. Int. J. Hydrogen Energy 2009,
  • 2009
Highly Influential
12 Excerpts

A Comparison of Different Approaches to Modelling the PEMFC

  • D. Harvey, J. G. Pharoah, K. Karen
  • Catalyst Layer. J. Power Sources
  • 2008
Highly Influential
4 Excerpts

Other Fuel Cells

  • M. M. Mench
  • In Fuel Cell Engines; John Wiley & Sons Inc…
  • 2008
Highly Influential
7 Excerpts

Modelling and Experimental Validation of a High Temperature Polymer Electrolyte

  • K. Scott, S. Pilditch, M. Mamlouk
  • Fuel Cell. J. Appl. Electrochem
  • 2007
Highly Influential
9 Excerpts

Three-Dimensional Computational Analysis of Transport Phenomena in a PEM

  • T. Berning, D. M. Lu, N. Djilali
  • Fuel Cell. J. Power Sources
  • 2002
Highly Influential
4 Excerpts

The Effect of Binder Content on the Performance of a High Temperature Polymer Electrolyte Membrane Fuel Cell Produced with Reactive Spray Deposition Technology

  • S. Kim, T. D. Myles, H. R. Kunz, D. Kwak, Y. Wang, R. Maric
  • Electrochim . Acta
  • 2015

Durability Study of HTPEMFC Through Current Distribution Measurements and the Application of a Model

  • D. Ubeda, P. Canizares, M. A. Rodrigo, F. J. Pinar, J. Lobato
  • Int. J. Hydrogen Energy 2014,
  • 2014
1 Excerpt

Similar Papers

Loading similar papers…