Anomalous High-frequency Resistance of Ferromagnetic Metals

  title={Anomalous High-frequency Resistance of Ferromagnetic Metals},
  author={J. Griffiths},
THE energy lost by a high-frequency current flowing in a conductor is dependent on the product of the electrical resistivity ρ and the magnetic permeability μ of the conductor, and this fact has been used by several investigators1,2,3 to determine the effective permeability of ferromagnetic metals at high frequencies. 
Ferromagnetic resonance in 3d metals at high magnetic fields
Abstract We measured the ferromagnetic resonance absorption in pulsed fields up to 35 T. The linewidth is analysed in terms of the phenomenological damping parameter λ and the exchange-conductivityExpand
On the determination of the complex permeability of ferromagnetic conductors at high frequencies
SummaryA method is discussed by which the complex propagation constant of electromagnetic waves in a concentric Lecher system can be determined without the use of calibrated high frequency measuringExpand
Microwave properties of solids
This report discusses the application of electron magnetic resonance techniques to defect and impurity sites in solids, conduction electrons in metals, ferromagnetic, ferrimagnetic andExpand
High Frequency Permeability of Ferromagnetic Materials
Methods are described for the measurement of resistive and inductive permeabilities over a range of frequencies from 150 to 10,000 Mc/s. The measurements of the resistive permeabilities were carriedExpand
Electric-field-induced ferromagnetic resonance excitation in an ultrathin ferromagnetic metal layer
Ferromagnetic resonance excitations offer a means to coherently manipulate the spin dynamics of spintronic devices and systems. A demonstration of the ability to control these excitations withExpand
Magnetic Dispersion at Microwave Frequencies
A method is described which has been developed for the measurement of initial permeabilities of ferromagnetic wires in the microwave region and successfully applied over the range from 3 to 13 cm.Expand
Ferromagnetic Resonance Transmission in the Iron Group Metals
This paper describes a two‐cavity microwave transmission experiment, carried out at a frequency of 35 GHz and a temperature of 4.2°K. A resonant transmission signal has been observed through thinExpand
A review of new magnetic phenomena
At a result of new developments, the classical concepts of magnetic materials, characterized by hysteresis loss and eddy currents, are no longer adequate. Study of the ferrites has revealed new andExpand
The Measurement of the Permeability of Low-conductivity Ferromagnetic Materials at Centimetre Wavelengths
A waveguide impedance method for the measurement of the permeability of low-conductivity ferromagnetic materials at centimetre wavelengths is described. The method avoids the difficulties andExpand
Exploring the accessible frequency range of phase-resolved ferromagnetic resonance detected with x-rays
We present time-and element-resolved measurements of the magnetization dynamics in a ferromagnetic trilayer structure. A pump-probe scheme was utilized with a microwave magnetic excitation field phExpand


Magnetic Permeability of Nickel in the Region of Centimetre Waves
IT is well known that the magnetic permeability of ferromagnetic materials decreases towards unity in the region of centimetre waves. The measurements by Hoag and Jones1 extend only down to 20 cm.Expand
The permeability of ferromagnetic materials at frequencies between 105 and 1010 c/s
Methods of measuring the permeability of ferromagnetic materials in high-frequency fields are described, and the main results obtained by various investigators are collated and discussed. It appearsExpand
Permeability of Iron at Ultra-Radio Frequencies