Analysis of heat conduction in a disk brake system

  title={Analysis of heat conduction in a disk brake system},
  author={F. Talati and Salman Jalalifar},
In this paper, the governing heat equations for the disk and the pad are extracted in the form of transient heat equations with heat generation that is dependant to time and space. In the derivation of the heat equations, parameters such as the duration of braking, vehicle velocity, geometries and the dimensions of the brake components, materials of the disk brake rotor and the pad and contact pressure distribution have been taken into account. The problem is solved analytically using Green’s… CONTINUE READING
Highly Cited
This paper has 17 citations. REVIEW CITATIONS


Publications citing this paper.
Showing 1-10 of 14 extracted citations


Publications referenced by this paper.
Showing 1-10 of 26 references

Third body influence on thermal friction contact problems: application to braking

  • D Majcherczak, P Dufrénoy, M Naı̈t-Abdelaziz
  • J Tribol 127:89–95
  • 2005
Highly Influential
4 Excerpts

Experimental heat transfer and flow analysis of a vented brake rotor

  • AD McPhee, DA Johnson
  • Int J Thermal Sci 47(4):458–467
  • 2007

The effect of Al2O3 on the friction performance of automotive brake friction materials

  • M Boz, A Kurt
  • J Tribo Int 40(7):1161–1169
  • 2007

Tribological behavior of Al–Si–SiCp composites/automobile brake pad system under dry sliding conditions

  • RK Uyyuru, MK Surappa, S Brusethaug
  • J Tribol Int 40(2):365–373
  • 2007

Tribological, thermal and mechanical coupling aspects of the dry sliding contact

  • D Majcherczak, P Dufrenoy, Y Berthier
  • Tribol Int 40:834–843
  • 2007
1 Excerpt

Frictionally excited thermoelastic instability in disc brakes—Transient problem in the full contact regime

  • J Voldřich
  • Int J Mech Sci 49(2):129–137
  • 2006

Numerical and experimental analysis of a Pegs-Wing ventilated disk brake rotor, with pads and cylinders. 10th EAEC European Automotive Congress, Serbia

  • PF Gotowicki, V Nigrelli, GV Mariotti, D Aleksendric, C Duboka
  • Serbia and Montenegro,
  • 2005
1 Excerpt

Preparation and characterization of brake linings from modified tannin-phenol formaldehyde resin and asbestos-free fillers

  • I Mutlu, MH Alma, MA Basturk
  • J Mat Sci
  • 2005

The role of transfer layers on friction characteristics in the sliding interface between friction materials against gray iron brake disks

  • MH Cho, KH Cho, SJ Kim, DH Kim, H Jang
  • Trib Lett 20(2):101–108
  • 2005

Characteristics and morphology of wear particles from laboratory testing of disk brake materials

  • M Mosleh, PJ Blau, D Dumitrescu
  • J Wear 256:1128–1134
  • 2004

Similar Papers

Loading similar papers…