State observer controller design for packets flow control in networks-on-chip
This paper proposed a prototype that analyses various Bio-medical parameters like temperature and heartbeat obtained from the sensors used &with the help of a microcontroller, all the parameters obtained are displayed on an LCD screen. Based on the parameters obtained the patient is continuously monitored and if in case of any critical mishap when the parameters go out of a particular range then it is prevented by the care system attached to the Patient Monitoring System. The primary function of this system is to sense the temperature and heartbeat of the patient and sensed data is sent to the embedded processor port. The processor is programmed to continue monitor the data and send the actuation signals to patient care system.