An Accurate Model for Fast Calculating the Resonant Frequency of an Irregular Solenoid

  title={An Accurate Model for Fast Calculating the Resonant Frequency of an Irregular Solenoid},
  author={Wenshen Zhou and Shaoying Huang},
  journal={IEEE Transactions on Microwave Theory and Techniques},
  • Wenshen Zhou, Shaoying Huang
  • Published 24 May 2019
  • Physics
  • IEEE Transactions on Microwave Theory and Techniques
A fast and accurate calculation of the resonant frequency of a solenoid coil is needed in many applications, e.g., wireless power transfer and magnetic resonance imaging. It helps to accelerate the design and optimization of a coil. However, the existing calculation models for the key equivalent parameters, the inductance (<inline-formula> <tex-math notation="LaTeX">$L$ </tex-math></inline-formula>) and the capacitance (<inline-formula> <tex-math notation="LaTeX">$C$ </tex-math></inline-formula… Expand
Modeling the Self-Capacitance of an Irregular Solenoid
Irregular solenoids, i.e., sparse solenoids, varied-pitch solenoids, and noncylindrical solenoids, has started to appear recently for specific applications, and an accurate and fast modeling of theirExpand
A Viaed Double-Spiral Resonator for Broadband WPT in Human-Involved Environments
For most strongly coupled magnetic resonance (SCMR) wireless power transfer (WPT) systems, a common problem is the dramatic efficiency drops by surrounding highly dielectric objects like human body,Expand
Aerosol jet printing on paper substrate with conductive silver nano material
Abstract Aerosol jet printing (AJP) is a promising method for micro-scaled digital additive manufacturing for printed electronics. It usually requires a high sintering temperature (280 °C) and a longExpand
Aerosol Jet Printing of Conductive Patterns on Paper Substrate
Aerosol jet printing (AJP) is a promising method for microscale digital additive manufacturing for printed electronics. However, it requires a high sintering temperature (280 ° C) and a longExpand


Fast and Accurate Inductance Calculations for Arbitrarily - Wound Coils for Pulsed Power Applications
Numerical modeling for certain pulsed power applications requires repeated and accurate calculation of the time-dependent inductance for complex geometries. Several models are available forExpand
Analytical Modeling and Optimization of Small Solenoid Coils for Millimeter-Sized Biomedical Implants
The new trend towards minimally invasive millimeter-sized and free-floating distributed implants promises to enable emerging applications, such as chronic neural recording with minimal damage to theExpand
An Implantable RF Solenoid for Magnetic Resonance Microscopy and Microspectroscopy
An implantable microcoil for diverse clinical applications, with a microliter coil volume, loosely based on implantable depth electrodes, which represents an estimated SNR improvement of over 30% as compared to the original design when extended to 4 cm. Expand
New analytic-numerical solutions for the mutual inductance of two coaxial circular coils with rectangular cross section in air
In this paper, we present analytic-numerical expressions for the calculation of the mutual inductance of two axisymmetric circular coils with rectangular cross section in air. This original and newExpand
Mutual inductance of noncoaxial circular coils with constant current density
The purpose of this paper is to determine the mutual inductance between two noncoaxial circular coils. In many cases, such as coil guns or tubular linear motors, one of them is fixed while the otherExpand
Mutual Inductance Calculation Between Circular Filaments Arbitrarily Positioned in Space: Alternative to Grover's Formula
In this paper, we present the full derivation of a new formula for calculating the mutual inductance between inclined circular filaments arbitrarily positioned with respect to each other. AlthoughExpand
A micro-fluxgate magnetic sensor using micromachined planar solenoid coils 1 Paper presented as part
Abstract This paper presents a new micro-fluxgate magnetic sensor based on micromachined 3-dimensional toroidal type planar coils used as excitation and sensing elements. A rectangular-ring shapedExpand
Stray capacitances of single-layer solenoid air-core inductors
This paper presents a method for predicting parasitic capacitances of solenoid HF inductors made of one layer of turns with circular cross sections, uniformly wound around a cylindrical nonconductiveExpand
Self-Capacitance of Single-Layer Inductors With Separation Between Conductor Turns
This letter presents the technique for estimating the self-capacitance of single-layer air-core solenoid inductors with separation between the insulated turns. In single-layer air-core inductors, theExpand
Safe inductive power transmission to millimeter-sized implantable microelectronics devices
  • Ahmed Ibrahim, M. Kiani
  • Engineering, Computer Science
  • 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
  • 2015
This work has demonstrated that operating at 10s of MHz offers higher allowable PDL under the safety absorption rate (SAR) constraints, and proposed a closed-form power function that relates maximum power levels that can safely be transferred at different frequencies under the SAR constraints. Expand