Alloying and heat treatment of steels with bainitic structure

@article{Kaletin1987AlloyingAH,
  title={Alloying and heat treatment of steels with bainitic structure},
  author={Yu. M. Kaletin and Andrii Ryzhkov and Andrey Kaletin},
  journal={Metal Science and Heat Treatment},
  year={1987},
  volume={29},
  pages={731-735}
}
Conclusions1.To ensure a good complex of mechanical properties, the alloying of bainitic steels has to be carried out in such a way that isothermal hardening is accopanied by the formation of carbidefree (lower) bainite with stable residual austen2.Alloying steels with silicon and aluminum, and also reducing the carbon content extends the time up to the onset of carbide formation in the bainite reaction and provides the possibility of obtaining carbidefree bainite with carbon enriched stable… 
Principles of Design of the Chemical Composition of Steels for Forming a Structure of Lower Carbide-Free Bainite Under Delayed Cooling
Phase and structural transformations in structural steels are studied by the methods of dilatometric analysis and light, scanning and transmission microscopy. Thermokinetic diagrams of decomposition
Formation of Structure of Lower Carbide-Free Bainite Due to Isothermal Treatment of Steels of Types Kh3G3MFS and KhN3MFS
The principal possibility of formation of a structure of lower carbide-free bainite under long-term holds is shown for steels of two alloying systems Kh3G3MFS and KhN3MFS containing 0.25 – 0.30 and
Corrosion-Wear of ST60-Mn Steel in Cassava Juice
Steels are used widely for production of machine components due to their versatility, low cost, ease of production and modification of their properties through heat-treatment. ST60Mn Steel is one of
Alloying principles and requirements for production technologies of new generation high-strength vessel steels
Alloying principles for new high-strength cold-resistant steels for marine equipment with a yield strength of 500–800 MPa are developed. The technology is based on a lower amount of expensive
Effetto dei trattamenti termici su componenti forgiati in acciaio ad alta resistenza
The aim of the work is to describe the effect that some heat treatments produce on two specific forged structural steels. On the bainitic structure of S690 a double tempering has been povided after

References

SHOWING 1-5 OF 5 REFERENCES
The Bainite Reaction in Fe-Si-C Alloys: The Secondary Stage
The de composition of austenite following the initial rapid formation of bainitic ferrite in silicon alloyed high-carbon steels isothermally transformed at 380 °C has been studied. The reaction is
The Bainite reaction in Fe-Si-C Alloys: The primary stage
The morphology, crystallography, and substructure of bainitic ferrite formed in silicon alloyed high-carbon steels in the temperature range 290 to 380 °C have been studied. The bainite exhibits a
A debate on the bainite reaction
The authors debate three topics central to the controversies which have enveloped the bainite reaction ever since it was first recognized as a distinctive mode of austenite decomposition. These