All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant

@article{Xiao2020AllperovskiteTS,
  title={All-perovskite tandem solar cells with 24.2\% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant},
  author={Ke Xiao and Renxing Lin and Qiaolei Han and Yi Hou and Zhen Zhen Qin and Hieu T. Nguyen and Jin Wen and Mingyang Wei and V. Yeddu and Makhsud I. Saidaminov and Yuan Gao and Xin Luo and Yurui Wang and Han Gao and Chunfeng Zhang and Jun Xu and Jia Zhu and Edward. H. Sargent and Hairen Tan},
  journal={Nature Energy},
  year={2020},
  volume={5},
  pages={870-880}
}
1National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing, China. 2School of Electronics Science and Engineering, Nanjing University, Nanjing, China. 3Department of Electrical and Computer Engineering, University of Toronto, Toronto, ON, Canada. 4School of Physics, Nanjing University, Nanjing, China. 5Research… 
Surface-anchoring zwitterionic antioxidant enables efficient, stable, and scalable all-perovskite tandem solar cells
State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter,
Wearable Tin-based Perovskite Solar Cells Achieved by a Crystallographic Size-Effect.
Tin-based perovskite solar cells (PSCs) demonstrate a potential application in wearable electronics due to its hypotoxicity. However, poor crystal quality is still the bottleneck for achieving
Enhancing the Electronic Properties and Stability of High-Efficiency Tin-Lead Mixed Halide Perovskite Solar Cells via Doping Engineering.
Overcoming Voc loss to increase the efficiency of perovskite solar cells (PSCs) has been aggressively studied. In this work, we introduce and compare rubidium iodide (RbI) and potassium iodide (KI)
Interface materials for perovskite solar cells
Perovskite solar cells exhibit great potential to become commercial photovoltaic technology due to their high power conversion efficiency, low cost, solution processability, and facile large-area
Improved stability and efficiency of perovskite/organic tandem solar cells with an all-inorganic perovskite layer
All-inorganic perovskite solar cells (PVSCs) have attracted intensive attention owing to their tunable bandgaps and excellent photo- and thermostability, making them promising absorbers in tandem
Oxalate Pushes Efficiency of CsPb0.7Sn0.3IBr2 Based All‐Inorganic Perovskite Solar Cells to over 14%
All‐inorganic CsPbIBr2 perovskite solar cells (PSCs) have recently gained growing attention as a promising template to solve the thermal instability of organic–inorganic PSCs. However, the relatively
Tin-lead-metal halide perovskite solar cells with enhanced crystallinity and efficiency by addition of fluorinated long organic cation
Highly performing mixed Sn/Pb-metal halide perovskite solar cells (PSCs) are among the most promising options to reduce Pb content in perovskite devices and enable, owing to their reduced bandgap,
Tin‐Lead Perovskite Fabricated via Ethylenediamine Interlayer Guides to the Solar Cell Efficiency of 21.74%
Tin‐lead perovskite solar cells (PSCs) show inferior power conversion efficiency (PCE) than their Pb counterparts mainly because of the higher open‐circuit voltage (Voc) loss. Here, it is revealed
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 50 REFERENCES
Monolithic Perovskite Tandem Solar Cells: A Review of the Present Status and Advanced Characterization Methods Toward 30% Efficiency
Tandem solar cells are the next step in the photovoltaic (PV) evolution due to their higher power conversion efficiency (PCE) potential than currently dominating, but inherently limited,
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Since the report in 2012 of a solid-state perovskite solar cell (PSC) with a power-conversion efficiency (PCE) of 9.7% and a stability of 500 h, intensive efforts have been made to increase the
Challenges for commercializing perovskite solar cells
TLDR
Recent progress in addressing stability, how to allow mass production, and how to maintain uniformity of large-area films are reviewed, and the remaining challenges along the pathway to their commercialization are discussed.
Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells
TLDR
The addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low-band gap perovskite films, enabling the demonstration of >20% efficient low–band gap PSCs.
Antioxidant Grain Passivation for Air-Stable Tin-Based Perovskite Solar Cells.
TLDR
The fabrication of air-stable FASnI3 solar cells is reported by introducing hydroxybenzene sulfonic acid or its salt as an antioxidant additive into the perovskite precursor solution along with excess SnCl2 along with the interaction between the sulfonate group and the Sn2+ ion.
Understanding of perovskite crystal growth and film formation in scalable deposition processes.
TLDR
This review, comprising the mechanistic analysis of perovskite film formation, thin film engineering, scalable deposition technologies and device stability, provides a comprehensive overview of the current challenges and opportunities in the field of PSCs, aiming to promote the future development of cost-effective up-scale fabrication of highly efficient and ultra-stable P SCs for practical applications.
Surface passivation of perovskite film for efficient solar cells
In recent years, the power conversion efficiency of perovskite solar cells has increased to reach over 20%. Finding an effective means of defect passivation is thought to be a promising route for
A critical review on tin halide perovskite solar cells
APbI3−xBrx perovskite solar cells with the bandgap of ∼1.5–1.6 eV, where A represents caesium, methylammonium, formamidinium and mixtures thereof, currently present certified efficiencies very close
Conventional Solvent Oxidizes Sn(II) in Perovskite Inks
The most efficient perovskite solar cell devices use Pb(II); however, the toxicity of lead and its decomposition products represent possible obstacles to their widespread commercial and carbon
...
1
2
3
4
5
...