All-nanosheet ultrathin capacitors assembled layer-by-layer via solution-based processes.

@article{Wang2014AllnanosheetUC,
  title={All-nanosheet ultrathin capacitors assembled layer-by-layer via solution-based processes.},
  author={Chengxiang Wang and Minoru Osada and Yasuo Ebina and Bao Li and Kosho Akatsuka and Katsutoshi Fukuda and Wataru Sugimoto and Renzhi Ma and Takayoshi Sasaki},
  journal={ACS nano},
  year={2014},
  volume={8 3},
  pages={
          2658-66
        }
}
All-nanosheet ultrathin capacitors of Ru0.95O20.2-/Ca2Nb3O10-/Ru0.95O20.2- were successfully assembled through facile room-temperature solution-based processes. As a bottom electrode, conductive Ru0.95O20.2- nanosheets were first assembled on a quartz glass substrate through a sequential adsorption process with polycations. On top of the Ru0.95O20.2- nanosheet film, Ca2Nb3O10- nanosheets were deposited by the Langmuir-Blodgett technique to serve as a dielectric layer. Deposition parameters were… Expand
Scalable Design of Two-Dimensional Oxide Nanosheets for Construction of Ultrathin Multilayer Nanocapacitor.
TLDR
Based on capacitance normalized by the thickness, the developed MNC outperforms state-of-the-art multilayer ceramic capacitors (MLCC, ≈22 µF cm-2 /5 × 104  nm) present in the market. Expand
High thermal robustness of molecularly thin perovskite nanosheets and implications for superior dielectric properties.
TLDR
This study demonstrates the high thermal stability of 2D perovskite-type niobate nanosheets in terms of structure and dielectric properties, which suggests promising potential for future high-k devices operable over a wide temperature range. Expand
Orientation control of KNbO3 film grown on glass substrates by Ca2Nb3O10− nanosheets seed layer
ABSTRACT KNbO3 films have been deposited by pulsed laser deposition on glass substrates covered by Ca2Nb3O10− nanosheets used as seed layer, for the purpose of promoting (001) preferentialExpand
Synthesis of large monolayer titania nanosheets through flux method
ABSTRACT Herein, we present the structural and electrical properties of layered titanate, the precursor of an ideal two-dimensional (2D) nanosheet. A K0.8Ti1.73Li0.27O4 (KTLO) sample was synthesizedExpand
Hunting for Monolayer Oxide Nanosheets and Their Architectures
TLDR
This paper reports a universal optical method for rapid and reliable identification of single- to quindecuple-layers in oxide nanosheets (Ti0.87O2, Ca2Nb3O10,Ca2NaNb4O13) and shows that the use of thinner SiO2 offers optimum visualization conditions with a contrast of >5%; the contrast is a nonmonotonic function of wavelength and changes its sign at ≈550 nm. Expand
Single Droplet Assembly for Two-Dimensional Nanosheet Tiling.
TLDR
By controlled thermal convection of a single droplet on a hot plate, a range of 2D nanosheets can be neatly tiled to form an ideal monolayer on various substrates in ∼30 s over a wide area (i.e., a 50 mmϕ substrate). Expand
Preparation and electrode properties of novel redoxable nanosheets of Mn–Ni oxide with and without vacancy defects
As potential cathode materials for thin-film energy storage devices, Mn­Ni oxide nanosheets with the chemical composition H0.46Mn0.81Ni0.19O2 (M81N19) were prepared. Upon restacking in HNO3 aqueousExpand
Layer-by-layer self-assembly of polyelectrolyte functionalized MoS2 nanosheets.
TLDR
The polyelectrolyte functionalized MoS2 nanosheet assembled LBL film-modified electrodes demonstrated enhanced electrocatalytic activity for H2O2 and are conducive to efficient sensors and advanced biosensing systems. Expand
2D perovskite nanosheets with thermally-stable high-κ response: a new platform for high-temperature capacitors.
TLDR
A robust high-temperature property of Ca2Nb3O10 nanosheet even in a monolayer form is found, and layer-by-layer assembled nanocapacitors retained both size-free high-εr characteristic and high insulation resistance at high temperatures up to 250 °C. Expand
Wafer-scale fabrication of conformal atomic-layered TiO2 by atomic layer deposition using tetrakis (dimethylamino) titanium and H2O precursors
Abstract The synthesis of ultra-thin atomic-layered oxides with precise thickness controllability and excellent uniformity remains a significant challenge in the fields of photovoltaics andExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 45 REFERENCES
Conductivity of ruthenate nanosheets prepared via electrostatic self-assembly: characterization of isolated single nanosheet crystallite to mono- and multilayer electrodes.
TLDR
Interestingly, the grain boundary resistance between nanosheets seems to contribute only slightly to the sheet resistance of self-assembled films, which was discussed based on a two-dimensional percolation model. Expand
Characterization of RuO2 electrodes on Zr silicate and ZrO2 dielectrics
The rutile stoichiometric phase of RuO2, deposited via reactive sputtering, was evaluated as a gate electrode on chemical vapor deposited ZrO2 and Zr silicate for Si–p-type metal–oxide–semiconductorExpand
Construction of highly ordered lamellar nanostructures through Langmuir-Blodgett deposition of molecularly thin titania nanosheets tens of micrometers wide and their excellent dielectric properties.
TLDR
The obtained films showed superior dielectric and insulating properties as a reflection of the highly organized film nanoarchitecture comparable to artificial lattice films produced via modern vapor-phase deposition processes. Expand
Titania Nanostructured Films Derived from a Titania Nanosheet/Polycation Multilayer Assembly via Heat Treatment and UV Irradiation
A multilayer film of titania nanosheet crystallites and poly(diallyldimethylammonium chloride) has been modified via heat treatment or exposure to UV light. The resulting films in various chemicalExpand
High-κ Dielectric Nanofilms Fabricated from Titania Nanosheets
In the semiconductor industry, increasing density requirements continue to motivate the production of microelectronic devices that function reproducibly at ever-smaller dimensions (a trend known asExpand
Robust high-κ response in molecularly thin perovskite nanosheets.
TLDR
This work has successfully fabricated multilayer nanofilms directly on SrRuO3 or Pt substrates without any interfacial dead layers, providing a key for understanding the size effect and also represents a step toward a bottom-up paradigm for future high-κ devices. Expand
(Ba, Sr)TiO3 Films Prepared by Liquid Source Chemical Vapor Deposition on Ru Electrodes
Electrical properties of (Ba, Sr)TiO 3 [BST] films have been investigated on RuO 2 /Ru and Ru electrodes instead of Pt, because they are easy to be etched. BST films were deposited at a substrateExpand
Studies on structural and electrical properties of barium strontium titanate thin films developed by metallo-organic decomposition
Thin films of barium strontium titanate (BST) including BaTiO3 and SrTiO3 end members were deposited using the metallo-organic decomposition (MOD) technique. Processing parameters such asExpand
Controlled Polarizability of One‐Nanometer‐Thick Oxide Nanosheets for Tailored, High‐κ Nanodielectrics
An important challenge in current microelectronics research is the development of techniques for making smaller, higher-performance electronic components. In this context, the fabrication andExpand
Influence of substrate on structural properties of TiO2 thin films obtained via MOCVD
Abstract Among the techniques developed for depositing thin films, metal-organic chemical vapor deposition is one of the most promising. In the present work, the deposition of TiO2 thin films onExpand
...
1
2
3
4
5
...