• Corpus ID: 18334143

Advanced Power Electronics Based FACTS Controllers: An Overview

@inproceedings{Srivastava2010AdvancedPE,
  title={Advanced Power Electronics Based FACTS Controllers: An Overview},
  author={Sanjeev K. Srivastava},
  year={2010}
}
With the ever-increasing complexities in power systems across the worldwide, especially opening of electric power markets, it becomes more and more important to provide stable, secure, controlled and high quality electric power on today's environment. The deregulation and competitive environment in the contemporary power networks will imply a new scenario in terms of load and power flow condition and so causing problems of line transmission capacity. Hence, there is an interest in better… 
D-FACTS CONTROLLER: ENHANCED POWER FLOW CONTROLLER
Modern FACTS controllers are being used to control the power through the modern power transmission system. The power transfer can be controlled by using these FACTS controllers in an efficient and
COMPARISON OF FACTS DEVICES FOR TWO AREA POWER SYSTEM STABILITY ENHANCEMENT USING MATLAB MODELLING
TLDR
Simulation results indicate that the STATCOM controller installed with two machine systems provides better damping characteristics in rotor angle as compared to two machine system installed with SVC, and transient stability enhancement of the two machineSystem installed with STATCOM is better than that installed withSVC.
STATCOM controllers based on fuzzy PI approach
TLDR
F fuzzy logic (FL) with the PI controller (a novel controller) its ability to improve the performance of the power system along with the capability of switch irregular and rough actual world data is presented.
Power Flow Analysis of Longitudinal Electrical Power System Incorporating Generalized Unified Power Flow Controller (GUPFC)
Generalized Unified Power Flow Controller (GUPFC) is a voltage source converter (VSC) based Flexible AC Transmission System (FACTS) controller for shunt and series compensation among the multiline
A C OMPREHENSIVE R EVIEW ON A D-FACTS C ONTROLLER : E NHANCED P OWER F LOW C ONTROLLER (EPFC)
Modern FACTS controllers are being used to control the power through the current power transmission system. The power transfer can be controlled by using these devices in an efficient and effective
Review on Design of Overhead Transmission Line by MATLAB Programming
This project aims to develop a solution for designing transmission lines which will leave the manipulation and calculation part for computer and just by feeding some basic data we will get an
TECHNOLOGY Optimal Placement of FACTS Devices in a Typical Power System
This paper presents an approach for the optimal placement of FACTS devices. The devices considered are Static Var Compensator (SVC) and Thyristor Controller Series Capacitor (TCSC). Optimal location
...
...

References

SHOWING 1-10 OF 38 REFERENCES
Power electronics in electric utilities: static VAR compensators
The author deals with dynamic VAR compensation of electric power systems, applying power electronics for reactive power generation and control. After an overview of the emergence and status of
Multi-converter FACTS devices: the generalized unified power flow controller (GUPFC)
This paper introduces the new concept of multi-converter (three or more) voltage-sourced-converter (VSC) based FACTS devices as well as DC "control sub-networks". A control subnetwork is defined as a
Modular ETO Voltage Source Converter Enables Low Cost FACTS Controller Applications
Flexible AC transmission system (FACTS) are critical element that can transform a passive grid to an active one through advanced power management of grid voltage, reactive power and power flow.
Unified power-flow control concept for flexible AC transmission systems
The author outlines the technical and economic factors which characterise the uniform, all solid-state power-flow controller approach for real-time controlled, flexible AC transmission systems. The
Convertible static compensator project-hardware overview
The development and implementation of a /spl plusmn/200 MVA convertible static compensator (CSC), the latest generation of flexible AC transmission system (FACTS) technology, will help relieve
Multi-teriminal UPFC for power system deregulation
  • B. MwinywiwaB. Lu G. Joós
  • Engineering
    2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077)
  • 2000
One original purpose of FACTS controllers is to increase the transmission capacity of existing lines thus deferring the necessity of building new lines. FACTS, such as the unified power flow
Role of FACTS in a deregulated market
  • N. Hingorani
  • Economics
    2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134)
  • 2000
The deregulation process has turned the electric utility world inside out. At the heart of restructuring is the need for competition in the trading of electric energy as a commodity. But that by
Role of Power Electronics Based FACTS Controller SVC for Mitigation of Power Quality Problems
TLDR
A case study of mitigation of power quality problems such as voltage sag, swell & interruption using FACTS controller SVC using PSCAD/EMTDC software was applied and results of simulation shows effectiveness of compensation.
Improvement of transient stability limit in power system transmission lines using fuzzy control of FACTS devices
The objective of this paper is to investigate the application of FACTS devices to increase the maximum loadability of power transmission lines which may be constrained by a transient stability limit.
...
...