Advanced Composite Materials by Resin Transfer Molding for Aerospace Applications

@inproceedings{Laurenzi2012AdvancedCM,
  title={Advanced Composite Materials by Resin Transfer Molding for Aerospace Applications},
  author={Susanna Laurenzi and Mario Marchetti},
  year={2012}
}
© 2012 Laurenzi and Marchetti, licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Advanced Composite Materials by Resin Transfer Molding for Aerospace Applications 

References

Publications referenced by this paper.
Showing 1-10 of 57 references

Resin flow analysis with fiber preform deformation in through thickness direction during Compression Resin Transfer Molding

  • J Merotte, P Simacek, SG. Advani
  • Composites Part A: Applied Science and…
  • 2010

An experimental investigation of class A surface finish of composites made by the resin transfer molding process

  • M Haider, P Hubert, L. Lessard
  • Composites Science and Technology
  • 2007

Liquid composite molding for aerospace applications. Case studied:Helicopter A 109 gearbox

  • S. Laurenzi
  • Sapienza University of Rome, School of Aerospace…
  • 2007

Modeling forces generated within rigid liquid composite molding tools. Part A: Experimental study

  • MJ Buntain, S. Bickerton
  • Composites Part A: Applied Science and…
  • 2007

Modeling forces generated within rigid liquid composite molding tools. Part B: Numerical analysis

  • S Bickerton, MJ Buntain
  • Composites Part A: Applied Science and…
  • 2007

Rapid prototyping of composite parts

  • MJ Tari, A Bals, J Park, MY Lin, H. Thomas Hahn
  • 2007

Rapid prototyping of composite parts using resin transfer molding and laminated object manufacturing

  • MJ Tari, A Bals, J Park, MY Lin, H ThomasHahn
  • Composites Part A : Applied Science and…
  • 2007

A micromechanical compaction model for woven fabric preforms

  • Z-R Chen, L Ye, T. Kruckenberg
  • Part I: Single layer. Composites Science and…
  • 2006

A micromechanical compaction model for woven fabric preforms . Part I : Single layer

  • Chen Z-R, L Ye
  • Composites Science and Technology
  • 2006

Similar Papers

Loading similar papers…