Accelerometer-based method for correcting signal baseline changes caused by motion artifacts in medical near-infrared spectroscopy.

@article{Virtanen2011AccelerometerbasedMF,
  title={Accelerometer-based method for correcting signal baseline changes caused by motion artifacts in medical near-infrared spectroscopy.},
  author={Jaakko Virtanen and Tommi E. Noponen and Kalle Kotilahti and Juha Virtanen and Risto J. Ilmoniemi},
  journal={Journal of biomedical optics},
  year={2011},
  volume={16 8},
  pages={
          087005
        }
}
In medical near-infrared spectroscopy (NIRS), movements of the subject often cause large step changes in the baselines of the measured light attenuation signals. This prevents comparison of hemoglobin concentration levels before and after movement. We present an accelerometer-based motion artifact removal (ABAMAR) algorithm for correcting such baseline motion artifacts (BMAs). ABAMAR can be easily adapted to various long-term monitoring applications of NIRS. We applied ABAMAR to NIRS data… 

Figures and Tables from this paper

Movement artefact removal from NIRS signal using multi-channel IMU data

TLDR
The artefact removal from natural movements demonstrated that the combination of gyroscope and magnetometer sensors with accelerometer provided better estimation and removal of the movement artefacts, which was revealed by the minimal change of the HbO2 and Hb level before, during and after movement artefact occurred in the NIRS signal.

A New Approach for Automatic Removal of Movement Artifacts in Near-Infrared Spectroscopy Time Series by Means of Acceleration Data

TLDR
AMARA is described in detail and validated using empirical NIRS data, measured over the prefrontal cortex in adolescents during sleep, and compared the performance of AMARA to that of MARA and ABAMAR based on validation data.

A Systematic Comparison of Motion Artifact Correction Techniques for Functional Near-Infrared Spectroscopy

TLDR
The routine application of motion correction techniques (particularly spline interpolation or wavelet analysis) are recommended to minimize the impact of motion artifacts on functional NIRS data.

Sensor Fusion in Human Cyber Sensor System for Motion Artifact Removal from NIRS Signal

TLDR
The results suggest that the motion fusion algorithm can provide a more accurate estimation and removal of motion artifacts and thus, supporting a better detection of hemodynamic changes.

Improving the accuracy of the method for removing motion artifacts from fNIRS data using ICA and an accelerometer

TLDR
The proposed method improved the accuracy of removing motion artifacts from functional near-infrared spectroscopy data by using t-tests and the correlation coefficient to identify the motion artifact component.

Hybrid motion artifact detection and correction approach for functional near-infrared spectroscopy measurements

TLDR
The proposed hybrid artifact detection and correction method enhances the viability of fNIRS as a functional neuroimaging modality and shows improvements in performance in SNR and R with strong stability.

Development of wireless NIRS system with dynamic removal of motion artifacts

TLDR
A wireless NIRS system combined with real time noise cancellation algorithm has great potential to be utilized in brain-computer interface (BCI) for physically challenged people, dynamic exercise tasks and cognitive studies for children and is expected to be highly applicable in neuroscience.

Artifact reduction in long-term monitoring of cerebral hemodynamics using near-infrared spectroscopy

TLDR
This work discussed motion and artifacts as challenges associated with long-term monitoring of cerebral hemodynamics in patients with epilepsy and the group’s approach to circumvent these challenges and improve the quality of the data collected.

A Motion Artifact Correction Procedure for fNIRS Signals Based on Wavelet Transform and Infrared Thermography Video Tracking

TLDR
A novel procedure for motion artifact correction for fNIRS signals based on wavelet transform and video tracking developed for infrared thermography (IRT) is presented and demonstrated the effectiveness of the procedure in eliminating noise.

Removal of motion artifacts originating from optode fluctuations during functional near-infrared spectroscopy measurements.

TLDR
A method was developed that optically eliminated hair-reflected light from the detection using linearly polarized light sources and an orthogonally polarized analyzer to avoid erroneous detection of short-circuited light.
...

References

SHOWING 1-10 OF 41 REFERENCES

Motion artifact cancellation in NIR spectroscopy using discrete Kalman filtering

TLDR
The proposed Kalman filtering based algorithm provides a suitable solution to the motion artifact removal problem in NIR studies by combining the advantages of the existing adaptive and Wiener filtering methods in one algorithm which allows efficient real time application with no requirement on additional sensor measurements.

Motion Artifact Removal for Functional Near Infrared Spectroscopy: A Comparison of Methods

TLDR
This work proposes the use of imaging channels with negligible distance between light source and detector to detect subject motion, without the need for an additional motion sensor, in functional NIRS.

Wavelet minimum description length detrending for near-infrared spectroscopy.

TLDR
A wavelet minimum description length (Wavelet-MDL) detrending algorithm is proposed to decompose NIRS measurements into global trends, hemodynamic signals, and uncorrelated noise components at distinct scales and demonstrates that the new detrended algorithm outperforms the conventional approaches.

Effects of improper source coupling in frequency-domain near-infrared spectroscopy

TLDR
Using this method, poor contact between the source optode and tissue can be detected and corrected before the actual measurement, which enables us to avoid the acquisition of low contrast cortical signals.

HomER: a review of time-series analysis methods for near-infrared spectroscopy of the brain.

TLDR
The practical implementation of various signal processing techniques for removing physiological, instrumental, and motion-artifact noise from optical data are described within the context of the MATLAB-based graphical user interface program, HomER, which is developed and distributed to facilitate the processing of optical functional brain data.

Properties of end-expiratory breath hold responses measured with near-infrared spectroscopy

TLDR
This result may help understand why breath hold duration varies between subjects more than the total [HbO2] increase during breath hold, and it may even indicate an individual's CO2 tolerance.