Abrasive wear behaviour of hard powders filled glass fabric–epoxy hybrid composites

  title={Abrasive wear behaviour of hard powders filled glass fabric–epoxy hybrid composites},
  author={N. Mohan and S. Natarajan and S. P. Kumareshbabu},
  journal={Materials \& Design},
Abstract The effect of incorporation of tungsten carbide (WC) and tantalum niobium carbide (Ta/NbC) powders on three-body abrasive wear behaviour in glass fabric–epoxy (G–E) composites was investigated and findings are analysed. A vacuum assisted resin transfer moulding (VARTM) technique was employed to obtain a series of G–E composites containing different fillers (WC and WC + Ta/NbC). Dry sand rubber wheel abrasion test was carried out at 200 rpm speed. The effect of different loads (22 and… Expand
Erosive Wear Behaviour of WC Filled Glass Epoxy Composites
Abstract The effect of incorporation of tungsten carbide (WC) powders on erosive wear behaviour in glass fabric-epoxy (G-E) composites was investigated and findings were analyzed. The vacuum-assistedExpand
Dry Sliding Wear Behaviour of Ta/NbC Filled Glass-epoxy Composites at Elevated Temperatures
In this work an attempt was made to evaluate wear loss, specific wear rate and coefficient of friction of Glass-Epoxy (G-E) composites with and without Tantalum Niobium Carbide (Ta/NbC) filler. AExpand
Investigation on two-body abrasive wear behavior of titanium carbide filled glass fabric-epoxy composites- a Box-Behnken approach
The two-body abrasive wear behavior of Glass–Epoxy (G–E) composites has been evaluated by the addition of Titanium carbide (TiC) as a secondary reinforcement using pin-on disc equipment at anExpand
Mechanical and abrasive wear response of PTFE coated glass fabric composites
Abstract The present study evaluates the influence of hybridization on the interlaminar shear and abrasive wear properties of composites manufactured with polytetrafluoroethylene (PTFE) coated glassExpand
Influence of reinforcing fiber on the dry sliding wear behavior of hybrid fabric/benzoxazine composites
Hybrid polyimide (PI)-polytetrafluoroethylene (PTFE)/Nomex fabric composites and Nomex-PTFE/Nomex fabric composites were prepared with benzoxazine (BOZ) as the resin binder. The tribologicalExpand
Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy composites
Abstract The effect of ceramic fillers like SiC and Al 2 O 3 on wear behavior of jute/epoxy composite has been experimentally investigated. The laminates of jute/epoxy composites with fillers in 5%,Expand
Thermo-Mechanical Properties and Abrasive Wear Behavior of Silicon Carbide Filled Woven Glass Fiber Composites
A study was done to determine the effect of physical, mechanical, thermal and three body abrasive wear response of Silicon Carbide (SiC) filled Glass Fiber Reinforced Epoxy (GFRE) composites. TheExpand
Investigation into Mechanical and Tribological Behaviour of Hollow Glass Microsphere (HGM) Reinforced Epoxy Composite
In the present work hollow glass microspheres (HGMs) filled epoxy composite with filler content from 0 to 20 wt. % were prepared in order to improve the abrasive wear and mechanical properties ofExpand
Abrasive wear performance of SiC-UHMWPE nano-composites – Influence of amount and size
Abstract Ultra-high-molecular-weight-polyethylene (UHMWPE) is extensively researched tribo-material since it shows very low coefficient of friction (µ) apart from excellent wear resistance in variousExpand
Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials
Abstract Bi-directional and chopped E-glass fiber reinforced epoxy composites are fabricated in five different (15, 20, 25, 30 and 35) wt% in an epoxy resin matrix. The mechanical characterization ofExpand


Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites
The effect of silicon carbide (SiC) particulate fillers incorporation on two-body abrasive wear behaviour of Glass Fabric - Epoxy (GE) composites was investigated and findings are analysed. TheExpand
Three-body abrasive wear behaviour of particulate-filled glass–vinyl ester composites
Abstract The incorporation of silicon carbide (SiC) and graphite fillers on three-body abrasive wear behaviour of glass–vinyl ester (G–V) composites has been investigated. Dry sand/rubber wheelExpand
Mechanical and Abrasive Wear Studies on Biobased Jatropha Oil Cake Incorporated Glass–Epoxy Composites
An investigation was made to evaluate the effect of the incorporation of jatropha oil cake (JOC) alone and in combination with silicon carbide (SiC) on the mechanical and tribological wear behaviourExpand
Three-body abrasive wear of short glass fibre polyester composite
Abstract Short E-glass fibre-reinforced polyester composites with and without filler have been studied for the low stress abrasive wear behaviour carried out using Rubber Wheel Abrasion Test (RWAT)Expand
Studies on abrasive wear of carbon fibre (short) reinforced polyamide composites
This paper reports the results of the abrasive wear investigations of various composites of polyamide (nylon 6,6) reinforced with increasing amounts of carbon fibre against various abrasive papersExpand
Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites
Abstract Fillers and fibre reinforcement increase the strength and stiffness of a polymer, and hence are effective in reducing wear in dry sliding conditions involving adhesion transfer or fatigue.Expand
Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications
Abstract Multi-pass two-body abrasive (m-2BA) wear behaviour of chopped strand mat (CSM) 450-R-glass fiber reinforced polyester (CGRP) composite material was investigated. In the present study,Expand
Friction and wear behavior of polyetherimide composites in various wear modes
Abstract A high performance engineering polymer, polyetherimide (PEI) and its two composites, one containing only short glass fibers (GF) 20% and the other, commercially established bearing materialExpand
Abrasive wear behaviour of polymeric materials
Abstract In this study the abrasive wear behaviour of aliphatic polyketone (APK), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), polyamide 66 (PA66), and 30% glass fibreExpand
The Wear Behaviour of Composite Materials with Epoxy Matrix Filled with Hard Powder
The wear behaviour of composite materials, sliding under dry conditions against smooth steel counterface, has been investigated. The composite materials consisted of glass woven fabric reinforcingExpand