ANALYSIS OF REINFORCED CONCRETE STRUCTURES USING ANSYS NONLINEAR CONCRETE MODEL
@inproceedings{BarbosaANALYSISOR, title={ANALYSIS OF REINFORCED CONCRETE STRUCTURES USING ANSYS NONLINEAR CONCRETE MODEL}, author={A. F. Barbosa and Gabriel O. Ribeiro} }
This paper considers the practical application of nonlinear models in the analysis of reinforced concrete structures. The results of some analyses performed using the reinforced concrete model of the general purpose finite element code Ansys are presented and discussed. The differences observed in the response of the same reinforced concrete beam as some variations are made in a material model that is always basically the same are emphasyzed. The consequences of small changes in modelling are…
97 Citations
Nonlinear Analysis of Reinforced Concrete Column with ANSYS
- Engineering
- 2016
Different methods have been utilized in order to assess the behavior and phenomenon of typical failures like flexural, shear, torsion, buckling etc. of the Reinforced concrete structures. Typically,…
Notice of RetractionThree-dimensional nonlinear finite element analysis of reinforced concrete structures based on ANSYS program
- Engineering2010 2nd International Conference on Computer Engineering and Technology
- 2010
The nonlinear material model that can effectively simulate the failure performance of reinforced concrete structures is presented and the differences of the results obtained by using different model combination are presented.
Analysis of Cracking in a Reinforced Concrete Beam
- Engineering, Materials Science
- 2015
Numerical models describing crack formation and growth in reinforced concrete give reasonably good estimates of the bearing capacity and durability of an element of the structure without expensive…
Analysis of Flanged Shear Wall Using Ansys Concrete Model
- Engineering
- 2011
The frequent occurrence of the major earthquakes in the Indian subcontinent, and construction of tall buildings, especially over the last two decades demands for the construction of earthquake…
Comparison Experimental & Analytical Results of Lightweight Reinforced Concrete Beam Strengthened with GFRP Strips
- Engineering
- 2017
This study includes performance of reinforced lightweight concrete beam strengthened with GFRP. Experimental results of reinforced lightweight concrete beams are compared with Finite Element Analysis…
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
- EngineeringStrength of Materials
- 2013
In this study, analytical and numerical investigations were extensively conducted to evaluate the flexural behavior of concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) rebars.…
Validation of Experimental and Analytical Results of Foamed Concrete Beam and Conventional Concrete Beam using ANSYS Workbench 14.5
- Engineering
- 2019
This study presents a numerical analysis using ANSYS Workbench finite element program to simulate the conventional reinforced concrete beam (NWC) with foamed concrete beam (FA Coarse 1400) under four…
Finite element analysis of the beam strengthened with prefabricated reinforced concrete plate
- Engineering
- 2010
Various strengthening methods were frequently carried out in the world to strengthen weaker cross section beams. In this study, one beam strengthened by bonding with a prefabricated plate which has…
Focused on Structural Integrity and Safety: Experimental and Numerical Perspectives Behaviour of precast reinforced concrete columns subjected to monotonic short-term loading
- Engineering
- 2019
This paper presents a case study on the behaviour of precast reinforced columns with non-conventional cross-section. An experimental program was developed to verify the serviceability and ultimate…
Finite Element Analysis of Spun Concrete Poles Reinforced with Glass Fiber Reinforced Polymer ( GFRP ) Bars
- Engineering
- 2016
This paper focus on modeling the flexural behavior of spun concrete poles reinforced with GFRP bars using finite element analysis. The finite element model was then verified through comparing the…
References
SHOWING 1-10 OF 11 REFERENCES
Reinforced Concrete
- EngineeringNature
- 1908
THIS is the latest text-book on a branch of engineering construction which during the past ten years has developed from its first small beginnings to such an important position that not only is it…
Finite-Element Analysis as a Design Tool
- Engineering
- 1993
This chapter covers the role of finite-element analysis in professional structural design. Past and present usage is covered lightly, with practice in a reputed design office as example. Some current…
Constitutive Equations for Engineering Materials, Volume I: Elasticity and Modeling
- Materials Science
- 1983
measurements constitutive modeling of growth, and coalescence. Applications include fragmenting rounds, fracture of geologic materials, and quasi-static ductile fracture of metals. mechanics problems…
Finite Element Analysis of Reinforced Concrete Structures II
- Engineering
- 1993
This proceedings, Finite Element Analysis of Reinforced Concrete Structures, presents papers from an international workshop sponsored by ASCE-ACI Committee 447 and held at Columbia University in the…
Analysis Systems, Ansys Theory Reference, Seventh Edition, Swanson Analysis Systems, s.d
- Analysis Systems, Ansys Theory Reference, Seventh Edition, Swanson Analysis Systems, s.d
Constitutive Models, Proceedings of the International Workshop on Finite Element Analysis of Reinforced Concrete Structures
- 1993
A Study of Models for Nonlinear Finite Element Analysis of Concrete Structures (Dissertation for attainment of Master Degree)
- A Study of Models for Nonlinear Finite Element Analysis of Concrete Structures (Dissertation for attainment of Master Degree)
- 1997
Analysis Systems, Ansys -Engineering Analysis System. Theoretical Manual (for Ansys Revision 4.4), Swanson Analysis Systems
- Analysis Systems, Ansys -Engineering Analysis System. Theoretical Manual (for Ansys Revision 4.4), Swanson Analysis Systems
- 1989