A modular path length corrector for recirculating linacs

@article{Owen2012AMP,
  title={A modular path length corrector for recirculating linacs},
  author={Hywel Owen and Peter Williams},
  journal={Nuclear Instruments \& Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment},
  year={2012},
  volume={662},
  pages={12-20}
}
  • H. Owen, P. Williams
  • Published 8 August 2011
  • Physics
  • Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment

Arclike variable bunch compressors

Electron bunch compressors formed of achromat arcs have a natural advantage over the more commonly used chicane compressors in that linearisation of the longitudinal phase space is of the correct

CLARA conceptual design report

This report describes the conceptual design of a proposed free electron laser test facility called CLARA that will be a major upgrade to the existing VELA accelerator test facility at Daresbury

A Hard X-Ray Compton Source at CBETA

Inverse Compton scattering (ICS) holds the potential for future high flux, narrow bandwidth x-ray sources driven by high quality, high repetition rate electron beams. CBETA, the Cornell-BNL Energy

2 0 1 4 J I N S T 9 T 0 5 0 0 1

This report describes the conceptual design of a proposed free electron laser test facility called CLARA that will be a major upgrade to the existing VELA accelerator test facility at Daresbury

Intense monochromatic photons above 100 keV from an inverse Compton source

Quasimonochromatic x rays are difficult to produce above 100 keV, but have a number of uses in x-ray and nuclear science, particularly in the analysis of transuranic species. Inverse Compton

Transform-limited x-ray pulse generation from a high-brightness self-amplified spontaneous-emission free-electron laser.

It is demonstrated, using linear theory and numerical simulations, that the radiation coherence length can be increased by approximately 2 orders of magnitude over SASE with a corresponding increase in spectral brightness.

References

SHOWING 1-10 OF 44 REFERENCES

An Isochronous Beam Recirculation Magnet System

The beam energy capability of an electron linear accelerator can be extended by using a magnetic transport system to return the beam after passing once through the accelerator, to the injector end

On the inherent stability of non-isochronous recirculating accelerators

Varying the Path Length of Charged Particles Using Wiggler Modules

In this paper, different versions of optical modules based on alternation of positive and negative curvature magnets, called wigglers in analogy with the devices used in electron machines, are

Beam transport design for a recirculating-linac FEL driver

The beam transport system for the CEBAF Industrial FEL includes a two-pass transport of the beam with acceleration from injector to wiggler, followed by energy recovery transport from wiggler to

Recirculating linac free-electron laser driver

This paper describes the design of a recirculating linac as a driver for the suite of seeded free-electron lasers (FELs) proposed in the UK New Light Source (NLS) project. The choice of

CTF3 : Design of Driving Beam Combiner Ring

In CTF3 the beam compression of the driving beam structure between the main linac and the decelerating section is obtained with a delay loop and a combiner ring which increase the pulse current by a

Tests with an Isochronous Recirculation System

An isochronous recirculation system is in operation at the MIT-Bates Accelerator Center. It is used to transport the electron beam from the output of the LINAC back to the input, to be reinjected so