• Corpus ID: 117824308

A micron-scale laser-based beam profile monitor for the international linear collider

@inproceedings{Deacon2009AML,
  title={A micron-scale laser-based beam profile monitor for the international linear collider},
  author={L. Deacon},
  year={2009}
}
A micron-scale laser-wire system was constructed and tested at the Accelerator Test Facility (ATF) extraction line at the High Energy Accelerator Research Organisation (KEK) in Japan. The system was evaluated through collision tests, electron beam tests, laser beam measurements and simulations. Beam halo measurements were carried out in order to compare the beam halo to a theory of its production through gas scattering and towards evaluating it as a source of background for diagnostic… 
Results from the laser-wire at ATF2 and development of a fibre laser for its upgrade
The commissioning and development of a laser-wire transverse electron beam profile monitor at the Accelerator Test Facility 2 in Japan is presented. The experimental setup used including a gigawatt

References

SHOWING 1-10 OF 16 REFERENCES
Upgraded laser wire beam profile monitor
Abstract We describe in this report an upgraded version of the laser wire beam profile monitor developed at KEK to measure a low-emittance electron beam in the ATF damping ring. This monitor is based
Micron Size Laser-wire System at the ATF Extraction Line
TLDR
The last measurements using the upgraded system from recent operation at the ATF are presented, demonstrating raw measurements of order 3 μ m RMS.
A two-dimensional laser-wire scanner for electron accelerators
Abstract A two-dimensional laser-wire scanner capable of measuring the transverse charge profiles of an electron (or positron) bunch has been constructed at the PETRA accelerator in DESY. The
ATF extraction line laser-wire system
The ATF extraction line laser-wire (LW) aims to achieve a micron-scale laser spot size and to verify that micron- scale beam profile measurements can be performed at the International linear collider
A Laser-Wire System at the ATF Extraction Line
A new laser-wire (LW) system has been installed at the ATF extraction line at KEK, Tsukuba. The system aims at a micron-scale laser spot size and employs a mode-locked laser system. The purpose-built
A STUDY OF EMITTANCE MEASUREMENT AT THE ILC
The measurement of the International Linear Collider (ILC) emittance in the ILC beam delivery system (BDS) is simulated. Estimates of statistical and machine-related errors are discussed and the
R&D STATUS OF ATF2 IP BEAM SIZE MONITOR (SHINTAKE MONITOR)
Shintake monitor[2] is a nanometer-scale electron beam size monitor. It probes a electron beam by an interference fringe pattern formed by split laser beams. Minimum measurable beam size by this
BDSIM - BEAMLINE SIMULATION TOOLKIT BASED ON GEANT4
BDSIM is a code that combines accelerator-style particle tracking with traditional Geant-style tracking based on Runge-Kutta techniques. This approach means that particle beams can be tracked
Development of a High Power Fibre Laser for Laser Based Electron Beam DiagnosticsEPAC’08
  • European Particle Accelerator Conference,
  • 2008
Hardware check of ATF extraction line, Minutes of ATF2 meeting
  • 2007
...
1
2
...