A finite element approach of the behaviour of woven materials at microscopic scale

@article{Durville2008AFE,
  title={A finite element approach of the behaviour of woven materials at microscopic scale},
  author={Damien Durville},
  journal={arXiv: Soft Condensed Matter},
  year={2008}
}
  • D. Durville
  • Published 18 April 2008
  • Physics, Computer Science
  • arXiv: Soft Condensed Matter
A finite element simulation of the mechanical behaviour of woven textile materials at the scale of individual fibers is proposed in this paper. The aim of the simulation is to understand and identify phenomena involved at different scales in such materials. The approach considers small patches of woven textile materials as collections of fibers. Fibers are modelled by 3D beam elements, and contact-friction interactions are considered between them. An original method for the detection of… 
Simulation of the mechanical behaviour of woven fabrics at the scale of fibers
A general approach to the mechanical behaviour of woven fabrics at the scale of individual fibers is proposed in this paper. In order to simulate the behaviour of samples of woven fabrics, all fibers
Modeling and simulation of textile and fibrous materials at the scale of individual fibers
As textile materials are increasingly used as reinforcements in composites structures, their mechanical properties need to be better identified, both at macroscopic scale to estimate for instance
Finite element simulation of the mechanical behavior of synthetic braided ropes and validation on a tensile test
A finite element approach to the mechanical behaviour of braided ropes at the scale of their internal components is proposed in this paper. The ropes considered are composed of a few tens of textile
Microscopic approaches for understanding the mechanical behaviour of reinforcement in composites
Abstract: An approach to the mechanical behaviour of textile composites at the scale of their constituting fibres, using an implicit finite element simulation code, is proposed in this chapter. The
Isogeometric analysis for numerical plate testing of dry woven fabrics involving frictional contact at meso-scale
With a view to application to meso–macro decoupled two-scale draping simulations of dry woven fabrics, the method of isogeometric analysis (IGA) is applied to the numerical plate testing (NPT) for
Modelling the structures and properties of woven fabrics
Abstract: Modelling the mechanical properties of woven fabrics has been a goal of researchers for many decades. Nowadays, numerical simulations permit different approaches at different scales. This
Towards an efficient two-scale approach to model technical textiles
The paper proposes and investigates an efficient two-scale approach to describe the material behavior of technical textiles. On the macroscopic scale the considered textile materials are modeled as
Modeling the mechanical properties of textile-reinforced composites with a near micro-scale approach
Abstract The performance of composite materials mainly depends on the mechanics of the embedded reinforcement structure. In high-performance composites, for the purpose of lightweight engineering,
Models of mechanical properties/behavior of dry fibrous materials at various scales in bending and tension: A review
Abstract The theoretical prediction of mechanical characteristics of multi-scale fibrous materials gains more and more importance because it helps to omit expensive experimental procedures, to study
Microscale Modeling of Effective Mechanical and Electrical Properties of Textiles
TLDR
A computational framework for assisting in the development of novel textiles is presented, using the FEniCS framework to construct and determine the mechanical, thermal, and electrical properties of a representative volume elements of a plain woven textile.
...
1
2
3
...

References

SHOWING 1-8 OF 8 REFERENCES
Finite Element Simulation of the Mechanical Behaviour of Textile Composites at the Mesoscopic Scale of Individual Fibers
A simulation of the mechanical behaviour of textile composites at the scale of fibers is presented in this article. The approach, based on a finite element code with an implicit solver, focuses on
A mesoscopic approach for the simulation of woven fibre composite forming
A finite element simulation of composite woven reinforcement forming requires the knowledge of the fabric mechanical behaviour. In the presented mesoscopic approach, the tensile and shear mechanical
Meso-FE modelling of textile composites: Road map, data flow and algorithms
Abstract Meso-scale (unit cell of an impregnated textile reinforcement) finite element (FE) modelling of textile composites is a powerful tool for homogenisation of mechanical properties, study of
Numerical simulation of entangled materials mechanical properties
A general approach to simulate the mechanical behaviour of entangled materials submitted to large deformations is described in this paper. The main part of this approach is the automatic creation of
Numerische Simulation der mechanischen Eigenschaften textiler Flächengebilde - Gewebeherstellung
High perfomance textiles especially woven fabrics made of multifilament yarns are widely spread in technical applications und will gain even more importance in the next years. Through further
Recent Advances in Textile Membranes and In flatable Structures, chap
  • Finite element simulation of the mechanical behaviour of textile c omposites at the mesoscopic scale of individual fibers, pp. 15–34. Springer
  • 2008
Numerical simulation of mechanical properti es of fabrics - weaving / numerische simulation der mechanischen eigenschaften textiler fläch engebilde - gewebeherstellung
  • Proceedings of the German 3rd LS-DYNA Forum 2004, Bamberg, Germ any
  • 2004