A fast radiated emission model for arbitrary cable harness configurations based on measurements and simulations

  title={A fast radiated emission model for arbitrary cable harness configurations based on measurements and simulations},
  author={H. Rebholz and Stefan Tenbohlen},
  journal={2008 IEEE International Symposium on Electromagnetic Compatibility},
Within a functional EMC simulation for automotive component tests, the cable harness shows significant influence to the radiated emissions. Detailed harness models can be generated with the help of a full wave simulation within the frequency range. However, the calculation process is a very time intensive task, especially if the complete setup in respect to CISPR25 for radiated emissions is considered. With the help of one simplified simulation and auxiliary calibration measurements, it is… CONTINUE READING


Publications citing this paper.
Showing 1-8 of 8 extracted citations

Impact of RF cables on the electromagnetic environment in vehicles

2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC) • 2017

Calculation of very near field radiated emission of a straight cable harness

2016 12th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME) • 2016
View 1 Excerpt

Prediction of Radiated Emissions From Cables Over a Metal Plane Using a SPICE Model

IEEE Transactions on Electromagnetic Compatibility • 2015
View 1 Excerpt

Prediction of radiated emissions from cables with multiple connections to a metal plane

2015 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC) • 2015

Simulation of radiated emission during the design phase based on scattering parameter measurement

2015 10th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo) • 2015
View 1 Excerpt


Publications referenced by this paper.
Showing 1-5 of 5 references

Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement

August 2002, International Electrotechnical Commission. • 2002
View 5 Excerpts
Highly Influenced

Combined PEEC/MoM solution technique for efficient electromagnetic emission calculations of PCBs in metallic enclosures

2004 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.04CH37559) • 2004
View 1 Excerpt

Analytical solutions in nonuniform multiconductor transmission line theory

J. Nitsch, F. Gronwald
IEEE Trans. Electromagn. Compat., Vol. 41, no. 4, p. 469-479, Nov. 1999 • 1999
View 1 Excerpt

Rational approximation of frequency domain responses by vector fitting,“ Power Delivery

B. Gustavsen
IEEE Transaction on vol. 14, • 1999
View 1 Excerpt

A comparison of the contributions of common-mode and differential-mode currents in radiated emissions

C. R. Paul
IEEE Trans. Electromagn. Compat., Vol. 31, Issue 2, p. 189-193, May 1989 • 1989

Similar Papers

Loading similar papers…