A failure-mode based anisomorphic constant life diagram for a unidirectional carbon/epoxy laminate under off-axis fatigue loading at room temperature

@article{Kawai2014AFB,
  title={A failure-mode based anisomorphic constant life diagram for a unidirectional carbon/epoxy laminate under off-axis fatigue loading at room temperature},
  author={Masamichi Kawai and Naoyuki Itoh},
  journal={Journal of Composite Materials},
  year={2014},
  volume={48},
  pages={571 - 592}
}
  • M. Kawai, N. Itoh
  • Published 2014
  • Materials Science
  • Journal of Composite Materials
The off-axis constant fatigue life diagrams for a unidirectional carbon/epoxy laminate in different fiber orientations are identified over the whole range of stress ratio. The experimental results show that the off-axis constant fatigue life diagram plotted in the plane of alternating and mean stresses tends to shrink and incline to the left of the alternating stress axis more significantly as the off-axis angle of a specimen increases. The overall shapes of the off-axis constant fatigue life… Expand
Off-axis fatigue behaviour of unidirectional laminates based on a microscale fatigue damage model under different stress ratios
Abstract A fatigue damage micro-model is developed for two-phase composite materials. Constitutive law is derived at the level of fibre and matrix and extended for a damaged lamina using theExpand
A general energy based fatigue failure criterion for the carbon epoxy composites
Abstract A normalized energy-based fatigue failure criterion, which employs off-axis stress and strain components to compute strain energy during cyclic loading, is presented in the current research.Expand
Fatigue Life Prediction of a Unidirectional Carbon Fiber Composite Under Off-Axis Spectrum Loads Using 3D Constant Life Diagram
In this study, a novel concept of 3D constant life diagram (CLD) for fatigue life prediction of a unidirectional (UD) polymer composite under spectrum load is proposed. Further, it is constructed andExpand
Experimental study and modeling of fatigue life prediction of plain weave carbon/polymer composite under constant amplitude loading
For fiber-reinforced composites, the anisotropy and the tension-compression asymmetry have very important influence on fatigue performance. The quasi-static and fatigue mechanical behavior of plainExpand
A microscale energy-based fatigue damage model for unidirectional composites under multiaxial loading at different stress ratios
Abstract The off-axis fatigue behavior of unidirectional composites has been studied using an energy based model. The fatigue model is based on average stresses in fiber and matrix derived from aExpand
An integrated methodology for fatigue life prediction of carbon fiber-reinforced polymer matrix composites under constant and variable R-ratio loadings
The progress in the anisomorphic constant fatigue life (CFL) diagram approach for efficiently identifying the fatigue of carbon fiber-reinforced composites under constant waveform loading over theExpand
Fiber break model for tension-tension fatigue of unidirectional composites
Abstract Damage progression in unidirectional (UD) composites in tension-tension fatigue is vital to understanding fatigue in more complex laminates and loading conditions. We therefore developed theExpand
A new constant life diagram model for the longitudinal fatigue of unidirectional composites
A new constant life diagram (CLD) model featuring asymmetric bilinear constant-life curves was proposed to better describe the longitudinal fatigue behavior of unidirectional laminae (UD) under aExpand
2D woven fabric composites under fatigue loading of different types and in different environmental conditions
In this chapter, the fatigue behavior of carbon fabric–reinforced epoxy laminates under different loading conditions is described. Constant fatigue life (CFL) diagrams at different temperatures inExpand
Adapted anisomorphic model for fatigue life prediction of CFRP laminates under constant amplitude loading
Abstract A new constant life diagram (CLD) model is proposed to predict the fatigue life of carbon fibre-reinforced epoxy laminates under constant amplitude (CA) loading. The CLD is asymmetric andExpand
...
1
2
3
4
...

References

SHOWING 1-10 OF 53 REFERENCES
Effects of Non-Negative Mean Stress on the Off-Axis Fatigue Behavior of Unidirectional Carbon/Epoxy Composites at Room Temperature
Influences of non-negative mean stress on the off-axis fatigue behavior of unidirectional composites are elucidated on the basis of a non-fragmentary set of data on the T800H/2500 carbon/epoxyExpand
Off-Axis Fatigue Behavior of Unidirectional Carbon Fiber-Reinforced Composites at Room and High Temperatures
High-temperature off-axis fatigue behavior of unidirectional T800H/Epoxy composite has been studied. Effects of different temperature on off-axis fatigue strength are also discussed. Tension-tensionExpand
High-Temperature Off-Axis Fatigue Behavior of Unidirectional Carbon Fiber-Reinforced Composites with Different Resin Matrices.
Off-axis fatigue behavior of unidirectional continuous carbon fiber-reinforced composites has been studied for T800H/epoxy. AS4/PEEK, and T800H/Polyimide systems, with a particular emphasis on theExpand
High-temperature off-axis fatigue behaviour of unidirectional carbon-fibre-reinforced composites with different resin matrices
Abstract The off-axis fatigue behaviour of unidirectional carbon-fibre-reinforced plastics has been studied at high temperature from a phenomenological point of view, with a particular emphasis onExpand
Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature
Abstract Exploration of a full shape of constant fatigue life (CFL) diagram and development of an efficient CFL diagram-based fatigue life prediction method are attempted for multidirectional CFRPExpand
Off-axis fatigue behavior of a carbon/epoxy cross-ply laminate and predictions considering inelasticity and in situ strength of embedded plies
Abstract The off-axis fatigue behavior of a carbon/epoxy symmetric cross-ply laminate at room temperature is examined, and a ply basis fatigue life prediction method is tested with a special emphasisExpand
A phenomenological model for off-axis fatigue behavior of unidirectional polymer matrix composites under different stress ratios
Abstract A phenomenological fatigue model is developed for the off-axis fatigue behavior of a class of unidirectional polymer matrix composites subjected to constant-amplitude stress cycling withExpand
Off-Axis Fatigue of Graphite/Epoxy Composite
Off-axis static and fatigue behavior of AS/3501-5A graphite/epoxy was studied in an effort to characterize the matrix/interface-controlled failure. Seven different off-axis angles were tested: 0, 10,Expand
Off-axis strength differential effects in unidirectional carbon/epoxy laminates at different strain rates and predictions of associated failure envelopes
Abstract A difference between off-axis tensile and compressive strengths in a unidirectional carbon/epoxy laminate is examined at 100 °C for different fiber orientations and strain rates. ByExpand
A Method for Identifying Asymmetric Dissimilar Constant Fatigue Life Diagrams for CFRP Laminates
The full shape of constant fatigue life (CFL) diagram has been identified for three kinds of carbon fiber-reinforced plastic (CFRP) laminates of [45/90/-45/0]2s, [0/60/-60]2s and [0/90]3s lay-ups,Expand
...
1
2
3
4
5
...