A comparative study of resonant inverter topologies used in induction cookers

@article{Llorente2002ACS,
  title={A comparative study of resonant inverter topologies used in induction cookers},
  author={Sergio Llorente and Francisco Monterde and Jos{\'e} Miguel Burd{\'i}o and Jes{\'u}s Acero},
  journal={APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335)},
  year={2002},
  volume={2},
  pages={1168-1174 vol.2}
}
  • S. Llorente, F. Monterde, +1 author J. Acero
  • Published 7 August 2002
  • Engineering
  • APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335)
In this paper, a comparison is performed between four inverter topologies commonly used in induction cookers. The considered topologies are the full-bridge inverter, the half-bridge inverter, and two single-switch inverters. All of them are designed for the same specifications and they are compared in aspects such as power device stresses, efficiency, frequency control and electromagnetic emissions. 
SiC single switch resonant inverters performance dependence on induction load
In this paper, a comparison between several induction loads operating in a One Switch - Zero Voltage Switching (1SW-ZVS) resonant converter is presented. The aim is to determine the optimal load forExpand
Summary of overall topologies of an induction cooker for home use (298)
  • S. Ghuge, M. R. Roda
  • Engineering
  • 2015 International Conference on Energy Systems and Applications
  • 2015
In induction cooker zero crossing detector of voltage, current was used, pulse width modulation, The various resonant techniques like quasi-resonant, series, parallel resonant were used in inductionExpand
Power measuring in two-output resonant inverters for induction cooking appliances
In induction cookers efficiency and service quality are improved with an appropriate power control. In this paper three power measuring methods are presented and analysed. These methods are designedExpand
Domestic induction cooking with a new loads multiplexing topology using mechanical switches
In this paper, a novel loads multiplexing topology is proposed in order to obtain a cost effective solution, presenting high efficiency, high utilization factor of electronics, and a reduction in theExpand
EMI improvements using the switching frequency modulation in a resonant inverter for domestic induction heating appliances
In this paper the spread-spectrum technique is applied to a resonant half-bridge inverter for domestic induction heating in order to improve the electromagnetic interference (EMI). This technique hasExpand
Mathematical Analysis of the Mirror Inverter based High Frequency Domestic Induction Cooker
Demand of domestic induction cooker increases day-by-day because of its inherent advantages. Different types of inverters are used in high frequency Induction cooker. This paper deals with theExpand
Design and development of IGBT resonant inverters for domestic induction heating applications
In this paper, resonant inverters for induction heating are developed for domestic applications. The design is based on half and full bridge single phase inverter of 1 and 4 kW rating. First, theExpand
Induction cooking systems with single switch inverter using new driving techniques
In this paper, some novel and modified driving techniques for a single switch zero voltage switching (ZVS) topology are introduced. These medium/high frequency and digitally synthesized drivingExpand
Resonant Inverter Topology for All-Metal Domestic Induction Heating
Nowadays domestic induction cookers usually heat ferromagnetic pans. This technology is well known and it is successfully applied by many manufacturers. However, there are a number ofExpand
Modelling and design of the half-bridge resonant inverter for induction cooking application
In this paper the design process of an half-bridge resonant inverter for induction cooking application is presented: firstly, the electrical behaviour of the system is investigated. The second stepExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 11 REFERENCES
Design of the half-bridge, series resonant converter for induction cooking
The forced commutated, half-bridge, series resonant power converter is well suited for induction cooking. A detailed analysis is made of the operation of this power converter to obtain theExpand
Induction-heating high-frequency inverters using static induction transistors
Voltage-Fed full-bridge series resonant inverters are described that use static induction transistors, and operate efficiently in the frequency range 100–1000 kHz. Trial inverters are considered forExpand
A new ZVS two-output series-resonant inverter for induction cookers obtained by a synthesis method
Multiple-burner induction cookers are suitable for using multiple-output inverters. Some state-of-the-art techniques use several single-output inverters or a single-output inverter multiplexing theExpand
A parallel resonant power supply for induction cooking using a GTO
A parallel resonant inverter is described which is suitable for commercial and domestic use as an induction cooking power supply. A gate turn off thyristor (GTO) operating a gate assisted zeroExpand
A novel type induction-heating single-ended resonant inverter using new bipolar Darlington-Transistor
Demonstrated is a novel type of single-ended resonant inverter using a new Bipolar Darlington-Transistor that operates efficiently in the frequency range of 20kHz to about 50kHz. The inverterExpand
Systems for induction heating and melting applications: a comparison of load commutated inverter
  • F. Dawson, P. Jain
  • Engineering
  • 21st Annual IEEE Conference on Power Electronics Specialists
  • 1990
A comparative analysis of current-source and voltage-source inverters suitable for induction heating and melting applications is presented. The comparison is based on criteria such as input powerExpand
Evaluation and comparison of power conversion topologies
Dual-element induction cooking unit using power MOSFETs
This paper describes a dual-element induction cooking unit using power MOSFETs. The circuit is based on a single-ended push-pull design which enables individual full-range power control of twoExpand
A unified discrete-time state-space model for switching converters
A unified nonlinear state-space model for arbitrary switching converters is presented, which uses discrete-time modeling of switches. Although its compact and powerful notation is valid for all typesExpand
Desing of the hal f-bridge series resonan t converters for induction cooking
  • IEEE Power Electronics Specialist Conference Rec.,
  • 1995
...
1
2
...