A Smart Home Automation system using IoT and Open Source Hardware

  title={A Smart Home Automation system using IoT and Open Source Hardware},
  author={B. S. S. Tejesh and S. Neeraja},
  journal={International journal of engineering and technology},
  • B. TejeshS. Neeraja
  • Published 18 March 2018
  • Computer Science
  • International journal of engineering and technology
In the era of Internet of Things, the information will be exchanged without the intervention of human. The manual systems are transforming into smart systems with the incorporation of IoT. The remote superintendence of electrical devices and sensors in the home environment with the employment of the internet is called as home automation. The electrical devices like bulb, fan and the sensors like temperature sensor, gas sensor, flame sensor, PIR sensor, current sensor are monitored and… 
4 Citations

Figures from this paper

Low-Cost ESP32, Raspberry Pi, Node-Red, and MQTT Protocol Based SCADA System

  • A. ZareM. Iqbal
  • Computer Science
    2020 IEEE International IOT, Electronics and Mechatronics Conference (IEMTRONICS)
  • 2020
A low-cost, open-source, and reliable Supervisory Control and Data Acquisition (SCADA) system for home monitoring and control system that helps the users to monitor various conditions in the home, such as temperature, humidity, pressure, and light intensity.

Object detection mechanism based on deep learning algorithm using embedded IoT devices for smart home appliances control in CoT

A smart home automation system using object detection algorithm based on model view controller (MVC) architecture deployed on Cloud of Things (CoT) architecture and the concept of distributed broker to support high number of publishers and subscribers is proposed.

Energy Distribution Control Electrolyser H 2 Tank Fuel CellCharge Discharge Smart Home Management App 1 App 2 App 2 App 3 Energy Storage / Recovery " 2 " Energy Storage / Recovery " 1 " Power Excess Power Deficit

The hybrid fuel cell electric vehicle powered by household power during peak use is another opportunity to reduce emissions and save money. For this reason, Vehicle-toHome (V2H) and Home-to-Vehicle

SPICE Model Identification Technique of a Cheap Thermoelectric Cell Applied to DC/DC Design with MPPT Algorithm for Low-Cost, Low-Power Energy Harvesting

  • Pantoli
  • Engineering
    Applied Sciences
  • 2019
In this work, an identification technique of a simple, measurements-based SPICE (Simulation Program with Integrated Circuit Emphasis) model is presented for small low-cost Peltier cells used in



IoT based monitoring and control system for home automation

This project aims at controlling home appliances via Smartphone using Wi-Fi as communication protocol and raspberry pi as server system to provide a climbable and price effective Home Automation system.

An Internet based wireless home automation system for multifunctional devices

The design and implementation of a low cost but yet flexible and secure Internet based home automation system that is designed to be low cost and flexible with the increasing variety of devices to be controlled.

Development of a smart home energy saving system combining multiple smart devices

To confirm the performance of the smart home electric energy saving system, a prototype was built up and tested at lab, and the test results validate the feasibility of the proposed system.

An Internet of Things (IoT) architecture for embedded appliances

The uID-CoAP architecture is proposed, a new architecture designed to host IoT services on common embedded systems, like usual consumer appliances, and a software framework for embedded appliance nodes, designed to reduce the burden of embedded appliance manufacturers by providing an intuitive, consistent, and easy-to-use APL.

Bluetooth based home automation system using cell phone

  • R. PiyareM. Tazil
  • Computer Science
    2011 IEEE 15th International Symposium on Consumer Electronics (ISCE)
  • 2011
This paper presents the design and implementation of a low cost but yet flexible and secure cell phone based home automation system that is designed to be low cost and scalable allowing variety of devices to be controlled with minimum changes to its core.

Internet of things in home automation and energy efficient smart home technologies

The history and implementation of the Internet of Things and how it can be used in home automation is explored and how close implementation actually is is determined.

A generic IoT architecture for smart cities

This paper provides classification of the IoT platforms and proposes a top-level generic IoT architecture particularly suited for the creation of smart cities.

Wireless Sensor Networks for Cost-Efficient Residential Energy Management in the Smart Grid

iHEM reduces the expenses of the consumers for each case, and packet delivery ratio, delay, and jitter of the WSHAN improve as the packet size of the monitoring applications, that also utilize theWSHAN, decreases.

The design of dual radio ZigBee homecare gateway for remote patient monitoring

A Dual Radio ZigBee Homecare Gateway (DRZHG) has been proposed and implemented to support remote patient monitoring and offers the most user friendly telehealth service to elderly people and long-terms patients.

Smart cloud search services: verifiable keyword-based semantic search over encrypted cloud data

A smart semantic search scheme is proposed in this paper, which returns not only the result of keyword-based exact match, but also the result-based semantic match and supports the verifiability of search result.