Corpus ID: 7994704

A Real-time Cycle-slip Detection and Repair Method for Single Frequency GPS Receiver

@inproceedings{RenARC,
  title={A Real-time Cycle-slip Detection and Repair Method for Single Frequency GPS Receiver},
  author={Zhoufeng Ren and Liyan Li and Jie Zhong and Minjian Zhao and Yingjie Shen}
}
Abstract—In GPS receivers, carrier phase measurement can be used to improve the receiver’s position accuracy. In order to maintain the accuracy, cycle-slip must be detected and repaired instantaneously and accurately. This paper first analyzes the implementation of Doppler-aided cycle-slip detection and repair method. Then introduce a simplified oscillator model. Based on the oscillator model, a modified method is proposed, which avoids the influence of the local oscillator bias. Data tests… Expand

Figures and Tables from this paper

High-rate Doppler-aided cycle slip detection and repair method for low-cost single-frequency receivers
TLDR
This work introduces a high-rate Doppler-aided cycle slips detection and repair (DACS-DR) method to detect and repair cycle slips in single-frequency low-cost GNSS receivers, which benefit from the availability of high- rate Dopplers measurements. Expand
A New Cycle Slip Detection and Repair Method for Single-Frequency GNSS Data
TLDR
A new method based on the total differential of ambiguity and Least-Squares Adjustment for cycle slip detection and repair is introduced and validated and results indicate this method is very effective and reliable in detecting and repairing multiple cycle slips, especially small cycle slips. Expand
GPS Cycle Slip Detection and Correction at Measurement Level
Carrier phase measurements are much more precise than pseudorange measurements and can be used to achieve very accurate positioning solutions. However, carrier phase measurements require resolutionExpand
Phase-Phase and Phase-Code Methods Modification for Precise Detecting and Predicting the GPS Cycle Slip Error
TLDR
A new algorithm was developed in this research to determine the change in the ionospheric values and the code bias from epoch to epoch by solving all observables equations by least square technique, which succeeds in detecting and predicting cycle slips of size of 1 cycle. Expand
Receiver clock jump and cycle slip correction algorithm for single-frequency GNSS receivers
We introduce a simple single-band receiver clock jump and cycle slip (CJCS) detection and correction algorithm suitable for a standalone single-frequency Global Navigation Satellite System (GNSS)Expand
Survey of Cycle Slip Detection & Correction Techniques for Single Frequency Receivers
TLDR
A review of the relevent work, including techniques for both point positioning and differential positioning, that has been carried out so far in the status of cycle slip detection and correction techniques for single frequency GNSS receivers is presented. Expand
Doppler-aided EWL Cycle Slip Detection and Repair Method
TLDR
A Doppler-aided EWL cycle slip detection and repair model is proposed herein and it could be observed that combining the proposed new method with traditional EWL method before adding any cycle slip will lower the first-order difference of integer ambiguity down to less than 0.5 cycles. Expand
Robust GNSS point positioning in the presence of cycle slips and observation gaps
Among the various factors limiting accurate positioning with a Global Navigation Satellite System (GNSS) is the inherent code error level on a code observation, cycle slip occurrence on a phaseExpand
GPS Cycle Slip Detection Considering Satellite Geometry Based on TDCP/INS Integrated Navigation
TLDR
This paper presents a means of carrier phase cycle slip detection for an inertial-aided global positioning system (GPS), which is based on consideration of the satellite geometry, and the results of a vehicle-based experiment verify the cycle Slip detection performance of the proposed algorithm. Expand
An improved TDCP-GNSS/INS integration scheme considering small cycle slip for low-cost land vehicular applications
TLDR
An accurate and efficient measurement model was derived and the strategy of treating cycle slip as a gross error is feasible in the TDCP-GNSS/INS tightly coupled navigation system, which can effectively avoid the long-term harm caused by small cycle slips. Expand
...
1
2
...

References

SHOWING 1-8 OF 8 REFERENCES
Instantaneous real-time cycle-slip correction for quality control of GPS carrier-phase measurements
TLDR
Compared with conventional approaches using carrier phases and pseudoranges, the approach does not require a smoothing or filtering process to reduce observation noise, and it is possible to implement the approach in real-time applications without undue complexity. Expand
GPS dynamic cycle slip detection and correction with baseline constraint
TLDR
A method of cycle slip detection and correction is proposed, which is suitable to the dynamic measurement using GPS carrier phase: the cycle slips detection is first achieved by triple difference observables, then the cycle slip correction is performed with baseline length constraint. Expand
The Global Positioning System: Signals, measurements, and performance
  • P. Enge
  • Computer Science
  • Int. J. Wirel. Inf. Networks
  • 1994
TLDR
This advanced tutorial will describe the GPS signals, the various measurements made by the GPS receivers, and estimate the achievable accuracies, and focus on topics which are more unique to radio navigation or GPS. Expand
A Method for Simulating the Crystal Oscillator Errors in GPS Receiver
  • JOURNAL OF ELECTRONICS & INFORMATION TECHNOLOGY
  • 2004
Realization Of GPS Satellite Time's Sampling And Verification Of Local Time
  • ELECTRONIC TECHNOLOGY
  • 2002
Understanding GPS. Principles and Applications
The Science of Timekeeping Application Note
  • The Science of Timekeeping Application Note
  • 1289
Global Positioning System: Theory and Applications, Volume I
  • Global Positioning System: Theory and Applications, Volume I