A Practical FMCW Radar Signal Processing Method and Its System Implementation

@article{Chang2006APF,
  title={A Practical FMCW Radar Signal Processing Method and Its System Implementation},
  author={Wu Chang and Li Huan and Li Yubai},
  journal={2006 6th International Conference on ITS Telecommunications},
  year={2006},
  pages={1195-1199}
}
  • Wu Chang, Li Huan, Li Yubai
  • Published 1 June 2006
  • Computer Science
  • 2006 6th International Conference on ITS Telecommunications
Frequency modulated continuous wave (FMCW) radar system measures objects and acquires information by changing the sending signal frequency along with the time and by measuring the receiving signal's frequency with respect to the sending signals. This paper introduces a practical FMCW radar signal processing method and system. This system is mainly used for eliminating noise interference from the sampled signal, checking out the objective signal, and sending the data as the processing results to… 
Design and Evaluation of C-Band FMCW Radar System
TLDR
The design and evaluation of C-Band Frequency Modulated Continuous Wave (FMCW) radar system is presented and the use of the FPGA will allow real-time signal processing.
Modelling of FMCW Radar at 10 GHz
Full form of RADAR is Radio Detection and Ranging. In general, radar systems are an electromagnetic system which sends energy to search for target. It will reflect the portion of this energy back to
Improved Processing and Increasing the Accuracy of Range Extraction in a FM/CW radar
TLDR
The low altitude primary search radar use a continuous wave, and in its simplest case, a sawtooth modulation is used in one scan and no modulation in the next one, and the frequency of the returning signal is determined by determining the frequency in two consecutive scans.
A Digital Signal Processing System of Biphase Coded QCW Radar Based on FPGA
Abstract. The biphase coded quasi-continuous wave(QCW) radar, which combines the advantages of both continuous wave (CW) radar and pulse Doppler (PD) radar, will be widely used in the land detecting
Development and Performance Analysis of Radar Signal Processing for Autonomous Unmanned Ground Vehicle
In this paper, we present signal processing procedure and carry out performance analysis of FMCW(Frequency Modulation Continuous Wave) radar for Autonomous Unmanned Vehicle(AUV). In order to detect
Parameter Estimation of Frequency Modulated Continuous Wave (FMCW) Radar Signal Using Wigner-Ville Distribution and Radon Transform
TLDR
It has been shown that the proposed algorithm can extract FM-CW radar modulation parameter efficiently and can eliminate the need of human intervention.
A System Level FMCW RADAR Optimization For Automotive Powertrain Control Application Requirements
A full system level analysis, design, and realization of frequency-modulation / continuouswave (FMCW) RADAR is presented in this thesis. RADAR technology has been around for over half a century, and
Calibration of X Band FMCW Radar Level Probe
In chemical industries, there are huge tanks filled with hazardous chemicals. These are present at extreme conditions of temperature and pressure. Measurement of the level in tanks is very important
The Evaluation of Probe Signals for Impulse Response Measurements in Shallow Water Environment
TLDR
An evaluation of channel impulse response (CIR) and power delay profile (PDP) measurements in shallow water environment using three types of probe signals, i.e., pseudonoise (PN)-sequence, exponentially sine swept (ESS), and amplitude-modulated ESS (AM-ESS).
A Microwave Reflectometer Prototype for Detection of Body Through the Rubble of Collapsed Buildings
A R T I C L E I N F O A B S T R A C T Article history: Received: 29 April, 2017 Accepted: 24 June, 2017 Online: 16 July, 2017 There is a growing interest in using radio frequency in imaging for
...
1
2
...

References

SHOWING 1-5 OF 5 REFERENCES
Linear FMCW radar techniques
  • A. Stove
  • Engineering, Computer Science
  • 1992
TLDR
How the strengths are utilised in some systems and how the weaknesses can be mitigated are described, and a modern implementation of a reflected power canceller is discussed, which can be used to suppress the leakage between the transmitter and the receiver.
Simulation of Digital Signal Processor on FMCW Radar
An implementation method of digital signal processor on frequency modulation continuous wave radar is introduced in this paper. Combining fast fourier transform algorithm field-programmable array
The radar system
A beat signal is generated by transmitting a frequency-modulated signal of a triangular-wave shape to a target and by receiving the signal reflected from the target. The beat signal is sampled and
Development and Application of DSP Technology
  • 2002
Radar Theory
  • 2002