A Novel Circular TE 01-Mode Bend for Ultra-High-Power Applications

@inproceedings{Tantawi2004ANC,
  title={A Novel Circular TE 01-Mode Bend for Ultra-High-Power Applications},
  author={Sami G. Tantawi},
  year={2004}
}
The Author is with Stanford Linear Accelerator Center (SLAC), Menlo Park, CA 94025. He is also with the communications and electronics Department, Cairo University, Giza, Egypt. Abstract— Future Linear Colliders and Accelerators require rf systems and components that are capable of handling hundreds of megawatts power levels at x-band frequencies and higher. Standard rf components that have been in use for a long time such as waveguide bends, directional couplers and hybrids, can not be used… CONTINUE READING

Similar Papers

Figures from this paper.

Citations

Publications citing this paper.
SHOWING 1-2 OF 2 CITATIONS

References

Publications referenced by this paper.
SHOWING 1-10 OF 13 REFERENCES

High magnetic fields in couplers of X-band accelerating structures

  • Proceedings of the 2003 Particle Accelerator Conference
  • 2003
VIEW 1 EXCERPT

The Generation Of 400-MW RF Pulses At X Band Using Resonant Delay Lines,

Sami G. Tantawi, et. al
  • IEEE Trans. on Microwave Theory and Techniques,
  • 1999
VIEW 2 EXCERPTS

Design Of A 90-Degrees Overmoded Waveguide Bend,

C. Nantista SLAC, N. M. Kroll, E.M
  • 3pp. Presented at 1993 Particle Accelerator Conference (PAC 93),
  • 1993
VIEW 1 EXCERPT

The Next Linear Collider Test Accelerator

  • Proceedings of International Conference on Particle Accelerators
  • 1993
VIEW 1 EXCERPT

Compact bend for TE01 mode circular overmoded waveguide

Jeffery W Waarren
  • U.S. patent #: 5,151,673, July 29, 1992. Submitted to IEEE Microwave and Wireless Components Letters
  • 1992
VIEW 1 EXCERPT

, and Edward F . Kuester , “ Electromagnetic waves and curved structures

David C. Chang
  • 1977