A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor

  title={A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor},
  author={Isao Takahashi and Toshihiko Noguchi},
  journal={IEEE Transactions on Industry Applications},
New quick-response and high-efficiency control of an induction motor, which is quite different from that of the field-oriented control is proposed. The most obvious differences between the two are as follows. 1) The proposed scheme is based on limit cycle control of both flux and torque using optimum PWM output voltage; a switching table is employed for selecting the optimum inverter output voltage vectors so as to attain as fast a torque response, as low an inverter switching frequency, and as… 

High-performance direct torque control of an induction motor

A novel direct torque control method for an induction motor is presented which is quite different from field-oriented control. Improving the torque response of a large-capacity induction motor using

Implementation of a new fast direct torque control algorithm for induction motor drives

This study proposes a new DTC method for IM, which enables fast torque response and constant switching frequency by optimising the selection of the voltage vectors to give maximum rate of torque increase.

Improved Torque Control Performance in Direct Torque Control using Optimal Switching Vectors

A significant improvement of Direct Torque Control (DTC) of 3-phases induction machine using a Cascaded H-Bidge Multilevel Inverter (CHMI) in order to increase the performance of the motor either in dynamic or steady-state condition.

The study on the direct torque controlled induction motor based on low loss inverter with double-frequency for electric vehicles

The simulation results show that this DTC system based on the inverter with double-frequency is effective for the control of the induction motor and the validity of the proposed new circuit is also verified.

A New Approach to Control of an Induction Motor Drive by Using ANN

Three-level neutral-point-clamped (NPC) inverters are very appropriate for high-power adjustable-speed drive applications. Direct torque control is characterized by the merits of fast response,

A Method to Realize Very Quick Torque Control of Induction Motor Systems with Voltage-Source Inverter

At the present time, almost all of the quick torque control of an induction motor is achieved by vector control or direct torque control methods using CSI (Current-Source Inverter) or VSI

New direct torque control scheme for induction motors

In this paper a novel controller based on direct torque control is presented. This controller has been designed to be applied in the control of induction motors fed with a three-level voltage source

Simulation and Experiment for Induction Motor Control Strategies

The main focus of this work is to design an induction motor control system using the three algorithms mentioned above, to analyze the performances of different control methods, and to validate these algorithms experimentally, comparing the simulation and experimental results.

Direct torque control of induction motor for low speed drives considering discrete effects of control and dead-time of inverter

  • Li YongdongShao JianwenSi Baojun
  • Engineering
    IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting
  • 1997
The direct torque control of an induction motor is an outstanding method based on instantaneous space vector theory. However the low-speed performance of this method is unsatisfactory. Some papers


Direct Torque Control (DTC) is an emerging technique for controlling the PWM inverter-fed induction motor drives (IMD). It allows the precise and quick control of the IM flux and torque without



An Approach to Flux Control of Induction Motors Operated with Variable-Frequency Power Supply

A new speed control system for induction motors has been developed which is capable of controlling with quick field weakening and superior response and stability. This method is to control the stator

Modes of Operation of Three-Phase Inverters

Three-phase inverters have different modes of operation, while the load power factor angle varies over a 3600 range. A method of analysis is described which makes it possible to find these modes of

A Rotor Parameter Identification Scheme for Vector-Controlled Induction Motor Drives

A rotor parameter identification technique for the purpose of updating the control gains of an induction motor vector controller is described. The approach utilizes the current source nature of a

The Influence of Motor Parameter Deviations in Feedforward Field Orientation Drive Systems

If the value of the time constant used in the slip calculator of a feedforward field orientation drive system deviates from the correct value, the decoupling of flux and torque is lost, and both

General Analysis of Three-Phase Inverters

A method of analysis for three-phase inverters is described. The method is based on Park vectors [1], [2] and predicts the waveforms of inverter quantities under various load conditions. The

Parameter Adaption for the Speed-Controlled Static AC Drive with a Squirrel-Cage Induction Motor

  • L. Garces
  • Engineering
    IEEE Transactions on Industry Applications
  • 1980
The performance of speed-controlled induction motor drives, without a direct sensing of the flux, depends heavily on the accuracy with which the motor parameters are known. They change widely with

Improved PWM method for induction motor drive inverters

  • Conf. Rec. 1983 IPEC j0 00 j _ j Isao Takahashi (M'81) was born in Japan on March 10 He received the B.S. degree in RV_, 1966 and the Ph.D. degree in 1971
  • 1942

Quick torque response control of an induction motor based on a new concept," presented at

  • IEEJ Tech. Meet. on Rotating Machine
  • 1984

Quick torque response control of an induction motor based on a new concept

  • presented at IEEJ Tech. Meet. on Rotating Machine RM84-76
  • 1984

Quick torque response control of an induction motor based on a new concept

  • 1984