A Modified Screen Printed Electrode Suitable for Electrochemical Measurements in Gas Phase.

@article{Toniolo2020AMS,
  title={A Modified Screen Printed Electrode Suitable for Electrochemical Measurements in Gas Phase.},
  author={Rosanna Toniolo and Nicol{\`o} Dossi and Emanuele Giannilivigni and Andrea Fattori and Rossella Svigelj and Gino Bontempelli and Agnese Giacomino and Salvatore Daniele},
  journal={Analytical chemistry},
  year={2020}
}
We describe here a convenient assembly for screen printed carbon electrodes (SPCE) suitable for enabling analyses in gaseous samples which are of course lacking in supporting electrolytes. This assembly consists of a circular crown of filter paper, soaked in a RTIL or a DES, placed upon a disposable screen printed carbon cell, so as to contact the outer edge of the carbon disk working electrode, as well as counter and reference electrodes. The electrical contact between the paper crown soaked… 
5 Citations

Enhanced electrochemical performance of screen-printed carbon electrode by RF-plasma-assisted polypyrrole modification

Screen-printed carbon electrode (SPCE) has been extensively used in electrochemical (EC) detections due to its excellent EC characteristics and low cost. However, SPCE is not sensitive to a small

Hand-Held and Integrated Tubular Tip-like Sensing Platform Series: Point-of-care Device for Semi-automated Multiplexed Assay.

The proposed tubular tip-like sensor platform was proposed, where a small tip accommodates all electrodes with a curved surface and also acts as a closed detection chamber, and was fully proved by detecting several liver-related biomarkers in 5 μL of the serum sample.

Paper-based aptamer-antibody biosensor for gluten detection in a deep eutectic solvent (DES)

This work describes a paper-based electrochemical sensing platform that uses a paper disc conveniently modified with recognition molecules and a screen-printed carbon electrode (SPCE) to achieve the detection of gluten in a deep eutectic solvent (DES).

References

SHOWING 1-10 OF 33 REFERENCES

Porous electrodes supported on ion-exchange membranes as electrochemical detectors for supercritical fluid chromatography.

The performance of this detector turned out to be quite better than that provided by a conventional on-line UV absorbance detector, and the recorded peaks were characterized by both a good reproducibility and a linear dependence of their height and area, which extended over a wide concentration range.

Screen-Printed Graphite Electrodes as Low-Cost Devices for Oxygen Gas Detection in Room-Temperature Ionic Liquids

This study highlights that not all screen-printed ink formulations are compatible with RTIL solvents for longer-term electrochemical experiments, and that the choice of RTIL is also important.

Simple pencil‐drawn paper‐based devices for one‐spot electrochemical detection of electroactive species in oil samples

The whole of collected findings pointed out that simple one‐spot tests performed by these devices enable olive oils to be easily distinguished from other edible oils on the basis of their clearly different voltammetric profiles.

Electrochemical Behavior of Chlorine on Platinum Microdisk and Screen-Printed Electrodes in a Room Temperature Ionic Liquid

As a result of the toxic and corrosive nature of chlorine gas, simple methods for its detection are required for monitoring and control purposes. In this paper, the electrochemical behavior of

New innovations in ionic liquid–based miniaturised amperometric gas sensors

  • D. Silvester
  • Materials Science
    Current Opinion in Electrochemistry
  • 2019

Comparison of Voltammetric Techniques for Ammonia Sensing in Ionic Liquids

In electroanalytical chemistry, it is often observed that square wave voltammetry (SWV) and differential pulse voltammetry (DPV) are more sensitive techniques compared to linear sweep voltammetry