4-V flexible all-solid-state lithium polymer batteries

  title={4-V flexible all-solid-state lithium polymer batteries},
  author={Zhen Chen and Guk‐Tae Kim and Zeli Wang and Dominic Bresser and Bingsheng Qin and Dorin Geiger and Ute Kaiser and Xue-sen Wang and Zexiang Shen and Stefano Passerini},
  journal={Nano Energy},

Interfacial Engineering at Cathode/LATP Interface for High-Performance Solid-State Batteries

Solid-state rechargeable lithium batteries are considered as one of the promising energy storage technologies due to their safety and high energy density. While developing better solid-state

Quasi-Solid-State Lithium Metal Batteries Using the LiNi0.8Co0.1Mn0.1O2-Li1+xAlxTi2-x(PO4)3 Composite Positive Electrode.

After filling up the majority of the electrode porosity with ILE, the NCM811-LATP composite electrodes offer improved capacity retention upon both long-term cycling tests and high-rate tests, due to the more stable LATP|NCM8 11 interface, and facilitated Li+ diffusion in the composite electrode bulk.

Lithium Phosphonate Functionalized Polymer Coating for High‐Energy Li[Ni0.8Co0.1Mn0.1]O2 with Superior Performance at Ambient and Elevated Temperatures

High‐energy Ni‐rich lithium transition metal oxides such as Li[Ni0.8Co0.1Mn0.1]O2 (NCM811) are appealing positive electrode materials for next‐generation lithium batteries. However, the high

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries.

The semi-interpenetrating network polymer (SNP) electrolyte has pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity, and the assembled quasi-solid-state lithium metal batteries (LiFePO4/SNP/Li) exhibit good cycling stability and rate capability at room temperature.

Highly Stable Quasi‐Solid‐State Lithium Metal Batteries: Reinforced Li1.3Al0.3Ti1.7(PO4)3/Li Interface by a Protection Interlayer

NASICON‐type Li1+xAlxTi2−x(PO4)3 (LATP) solid electrolytes have developed as a promising candidate for solid‐state lithium batteries. However, the brittle and stiff LATP suffers from poor physical



Flexible/shape-versatile, bipolar all-solid-state lithium-ion batteries prepared by multistage printing

Bipolar all-solid-state lithium-ion batteries (LIBs) have attracted considerable attention as a promising approach to address the ever-increasing demand for high energy and safety. However, the use

Ionic-Liquid-Based Polymer Electrolytes for Battery Applications.

This Review focuses on ternary polymer electrolytes, that is, ion-conducting systems consisting of a polymer incorporating two salts, one bearing the lithium cation and the other introducing additional anions capable of plasticizing the polymer chains.

A Lithium-Ion Battery with Enhanced Safety Prepared using an Environmentally Friendly Process.

A new lithium-ion battery chemistry is presented based on a conversion-alloying anode material, a carbon-coated Fe-doped ZnO (TMO-C), and a LiNi1/3 Mn 1/3 Co1/ 3 O2 (NMC) cathode, which substantially improves the safety of the system.

Solid‐State Lithium‐Polymer Batteries Using Lithiated MnO2 Cathodes

We have used a lithiated MnO 2 , Li 0 33 MnO 2 , with ordered alternating one-dimensional [1 × 2] and [1 × 1] channels as a cathode material in solid-state lithium/polymer cells. An optimized cell

Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteries

The scientific community is continuously committed to the search for new high energy electrochemical storage devices. In this regard, lithium metal batteries, due to their very high electrochemical

Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects

In this Perspective, views on improving this emerging battery system by nanoscience are shown on rational design of the solid-state Li metal battery for optimized performance.