3D Printed Electrophoretic Lab-on-chip for DNA Separation

@article{Adamski20163DPE,
  title={3D Printed Electrophoretic Lab-on-chip for DNA Separation},
  author={Krzysztof Adamski and Wojciech Kubicki and Rafal Walczak},
  journal={Procedia Engineering},
  year={2016},
  volume={168},
  pages={1454-1457}
}
Abstract In this paper we present for the first time inkjet 3D printed lab-on-a-chip for DNA analyse by on-chip gel electrophoresis. Separation of 50÷800 bp DNA ladder was successfully performed. According to our best knowledge it is the first example of such application of 3D printed microfluidics structure. Thanks to advantages of 3D printing it is possible to develop lab-on-a-chip with user defined configuration with less than 3 hours and estimated costs pre chip less than 1 EUR. 
Configurable on-Chip Gel Electrophoresis in Inkjet 3D Printed Microfluidic Modules
Inkjet 3D printing is with success used for preparation microfluidics devices as a microfluidic chips for DNA separation. Utilized this technic help us to prepare a chip in shorter time and cheaper,Expand
Inkjet 3D Printing of Labs-on-a-Chip with Optical Detection
  • R. Walczak
  • Computer Science
  • 2018 XV International Scientific Conference on Optoelectronic and Electronic Sensors (COE)
  • 2018
TLDR
In this paper result of author's research works on applicability of inkjet 3D printing is described and special attention was paid to optical properties of the printed microstructures. Expand
A 3D Printed Membrane-Based Gas Microflow Regulator for On-Chip Cell Culture
A miniature 3D printed membrane-based gas microflow regulator which delivers gaseous media to on-chip cell cultures is presented in this paper. The device uses a polydimethylosiloxane (PDMS) membraneExpand
Inkjet 3D printing – towards new micromachining tool for MEMS fabrication
Three-dimensional (3D) printing has the potential to transform science and technology by creating bespoke, low-cost appliances that previously required dedicated facilities in order to be made. AnExpand
Modular 3D printed lab-on-a-chip bio-reactor for the biochemical energy cascade of microorganisms
The paper presents the sandwiched polymer 3D printed lab-on-a-chip bio-reactor for the biochemical energy cascade of microorganisms. Euglenas and yeast were separately and simultaneously cultured forExpand
Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review
TLDR
It is concluded that today, 3D printers could already be used in every research lab and printing droplet microfluidics is also a possibility, albeit with some challenges discussed in this review. Expand
Era of nano-lab-on-a-chip (LOC) technology
TLDR
In this chapter, an overview of LOC technology, including its evolution and latest applications in biological, food, and environmental samples, is provided. Expand
Smart phone-powered capillary electrophoresis on a chip for foodborne bacteria detection
Abstract Due to the requirement of high-voltage power supply, on-chip micro-capillary electrophoresis (μCE) suffers from practical on-site bioapplications. In this paper, we introduced a smart phoneExpand
Freeze-thaw valves as a flow control mechanism in spatially complex 3D-printed fluidic devices
Abstract In this paper, we demonstrate a proof-of-principle of a freeze-thaw valve (FTV) created in a 3D-printed fluidic device. Portions of channels are enveloped by cooling and heating jackets, andExpand
Micro-Particle Image Velocimetry for imaging flows in passive microfluidic mixers
The micro-Particle Image Velocimetry (micro-PIV) was used to measure flow velocities in micro-channels in two passive micromixers: a microfluidic Venturi mixer and a microfluidic spiral mixer, bothExpand
...
1
2
...

References

SHOWING 1-2 OF 2 REFERENCES
Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes
TLDR
This work intends to discuss the potential and application examples of such processes with a detailed view on applicable materials, and point out the advantages and the disadvantages of the respective technique. Expand
Fluorescence detection by miniaturized instrumentation based on non-cooled CCD minicamera and dedicated for lab-on-a-chip applications
TLDR
A brief discussion on fluorescence detection in lab-on-a-chip is presented, and novel low-cost detection instrumentation utilising noncooled CCD image sensor and semiconductor laser light source is described. Expand