• Publications
  • Influence
Influence of bond coat surface roughness on the structure of axial suspension plasma spray thermal barrier coatings — Thermal and lifetime performance
Influence of Bond Coat Surface Roughness on the Structure of Axial Suspension Plasma Spray Thermal Barrier Coatings - Thermal and Lifetime Performance
  • 58
  • 1
Structural, Mechanical and Erosion Properties of Yttrium Oxide Coatings by Axial Suspension Plasma Spraying for Electronics Applications
Yttrium oxide (Y2O3) coatings have been prepared by axial suspension plasma spraying with fine powders. It is clarified that the coatings have high hardness, low porosity, high erosion resistanceExpand
  • 28
  • 1
Effect of a sputtered TiAlCr coating on the oxidation resistance of TiAl intermetallic compound
The effect of a sputtered TiAlCr coating on the oxidation resistance of TiAl intermetallic compound was investigated in static air. The bare TiAl alloy exhibited poor isothermal and cyclic-oxidationExpand
  • 64
  • 1
The effects of several coatings on cyclic oxidation resistance of TiAl intermetallics
The behaviours of Al2O3, aluminide, CoCrAlY and TiAlCr coatings on the cyclic oxidation resistance of a TiAl alloy were investigated. Al2O3 coating exhibited limited improvement of the cyclicExpand
  • 50
  • 1
Effect of Al2O3 and enamel coatings on 900°C oxidation and hot corrosion behaviors of gamma-TiAl
The effect of reactively sputtered Al2O3 and enamel coatings on oxidation and hot corrosion behaviors of TiAl was investigated at 900 degrees C. Isothermal oxidation testing indicated that bothExpand
  • 97
Hot-Corrosion Behavior of TiAl-Base Intermetallics in Molten Salts
The hot-corrosion behavior of Ti-50Al,Ti-48Al-2Cr-2Nb, and Ti-50Al10Cr alloys was investigatedin (Na, K)2SO4 andNa2SO4 + NaCl melts. TiAlintermetallics showed much better hot-corrosionresistance inExpand
  • 40
Effect of a sputtered TiAlCr coating on hot corrosion resistance of gamma-TiAl
The effect of a sputtered Ti-50Al-10Cr coating on hot corrosion Behaviour of gamma-TiAl was investigated in (Na,K)(2)SO4 and Na2SO4 + NaCl melts. The TiAlCr coating was effective in improving the hotExpand
  • 48
Isothermal Oxidation Behavior of VC and Columnar Structured Thermal Barrier Coatings Deposited by Suspension Plasma Spray Technology
The effects of different thermal barrier coating (TBC) top coat structures and substrate alloys on the isothermal oxidation behaviors of TBC systems were investigated at 1080 °C in lab air. TheExpand
  • 11
Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying
Due to its high thermal stability and purely oxide ionic conductivity, yttria-stabilized zirconia (YSZ) is the most commonly used electrolyte material for solid oxide fuel cells (SOFCs). StandardExpand
  • 20
Plasma spray synthesis of ultra-fine YSZ powder
Abstract A plasma spray process has been developed for the mass production of nanopowders for solid oxide fuel cells (SOFCs) and significant technical developments have been achieved during the pastExpand
  • 16
...
1
2
3
4
...