Youyi Xu

Learn More
This study aims to explore the fundamental surface characteristics of polydopamine (pDA)-coated hydrophobic polymer films. A poly(vinylidene fluoride) (PVDF) film was surface modified by dip coating in an aqueous solution of dopamine on the basis of its self-polymerization and strong adhesion feature. The self-polymerization and deposition rates of dopamine(More)
Polypropylene hollow fiber membrane (PPHFM) contactor, with aqueous solution absorbent such as sodium hydroxide (NaOH), monoethanolamine (MEA) and diethanolamine (DEA), was designed and used to separate and fix CO 2 from CO 2 /N 2 gas mixtures. The factors that influence the separation properties of CO 2 /N 2 were investigated. It was found that the CO 2(More)
A facile and versatile approach for the preparation of antifouling and antimicrobial polymer membranes has been developed on the basis of bioinspired polydopamine (PDA) in this work. It is well-known that a tightly adherent PDA layer can be generated over a wide range of material surfaces through a simple dip-coating process in dopamine aqueous solution.(More)
In this paper, wastewater was treated with Recirculated Membrane Bio-Reactor (RMBR) and effluent quality became stable after four days running continuously. Critical membrane flux was increased with increasing crossflow velocity between 0.9-1.9 m/s. Under crossflow velocity of 1.9 m/s, critical membrane flux was enhanced from 72 L/(m2.h) to 76 L/(m2.h) or(More)
Polyethersulfone (PES) membranes with improved hemocompatibility were prepared via solid-liquid interface aminolysis and heparinization. Reactive amino groups were generated by immersing solid PES membranes in proper diamine solution. Heparin was covalent immobilized on the surface via amide bond. The feasibility of surface aminolysis for the introduction(More)
Nowadays the quality inspect of soft capsules is mainly by manual. Despite the intensive of this work, the accuracy of inspection by manual is very low. This paper proposed soft capsules online sorting system based on machine vision. The inspection process are following: (1) soft capsules were placed on rollers are rotating while moving. The image of each(More)
In this paper, membrane contactor made of hydrophobic hollow fiber polypropylene porous membrane (HFPPM) was used for separating carbon dioxide (CO2) from CO2/N2 mixtures. The effects of absorbents, concentration and flow rate of feeding gas and absorbent solution, lumen/shell side processes and gas permeability of HFPPM(P) on the CO2 absorption efficiency(More)
  • 1