Yoon-Young Choi

Learn More
We fabricated a carbon nanotube (CNT)/ polydimethylsiloxane (PDMS) composite-based dry ECG electrode that can be readily connected to conventional ECG devices, and showed its long-term wearable monitoring capability and robustness to motion and sweat. While the dispersion of CNTs in PDMS is challenging, we optimized the process to disperse untreated CNTs(More)
Polymer ferroelectrics are flexible and lightweight electromechanical materials that are widely studied due to their potential application as sensors, actuators, and energy harvesters. However, one of the biggest challenges is their low piezoelectric coefficient. Here, we report a mechanical annealing effect based on local pressure induced by a nanoscale(More)
By combining the merits of traditional template-assisted methods for polymer nanostructure fabrication, we demonstrate an immersion crystallization process that combines features of polymer crystallization and template removal simultaneously. Well-aligned poly(vinylidene fluoride-trifluoroethylene) copolymer nanorod arrays are prepared for the first time(More)
Importance Data are needed to evaluate community interventions to reduce consumption of sugary drinks. Supermarket sales data can be used for this purpose. Objective To compare beverage sales in Howard County, Maryland (HC), with sales in comparison stores in a contiguous state before and during a 3-year campaign to reduce consumption of sugary beverages.(More)
PVDF and P(VDF-TrFE) nano- and micro- structures have been widely used due to their potential applications in several fields, including sensors, actuators, vital sign transducers, and energy harvesters. In this study, we developed vertically aligned P(VDF-TrFE) core-shell structures using high modulus polyurethane acrylate (PUA) pillars as the support(More)
We investigated the effect of the Ag nanoparticles on the ferroelectric and piezoelectric properties of Ag/poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) composite films. We found that the remanent polarization and direct piezoelectric coefficient increased up to 12.14 μC/cm(2) and 20.23 pC/N when the Ag concentration increased up to 0.005 volume(More)
Advanced scanning probe microscopies (SPMs) open up the possibilities of the next-generation ferroic devices that utilize both domains and domain walls as active elements. However, current SPMs lack the capability of dynamically monitoring the motion of domains and domain walls in conjunction with the transport of the screening charges that lower the total(More)
A charge gradient microscopy (CGM) probe was used to collect surface screening charges on poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] thin films. These charges are naturally formed on unscreened ferroelectric domains in ambient condition. The CGM data were used to map the local electric current originating from the collected surface charges on(More)
This paper presents a simple self-commissioning algorithm to estimate various motor parameters for Rotor-Flux-Oriented (RFO) induction motor drive. As the parameters are calculated from simple voltage equations and integration, it is possible for the proposed algorithm to be included in the main program with a low cost micro-controller. Also, it works well(More)
  • 1