• Publications
  • Influence
Cordless solid-state hydrogen sensor using proton-conductor thick film
Abstract Potentiometric as well as amperometric solid-state gas sensors using a thick film (≈ 10 μm) of proton-conductor have been developed for detecting small amounts of hydrogen in air at roomExpand
  • 31
  • 2
Solid-state potentiometric CO2 sensors using anion conductor and metal carbonate
Abstract Solid-state potentiometric CO 2 sensors have been fabricated by combining a fluoride-ion conductor (LaF 3 ) or an oxide-ion conductor (stabilized zirconia) with an auxiliary phase of a metalExpand
  • 30
  • 2
Solid Electrolyte CO2 Sensor Using Binary Carbonate Electrode
A simple potentiometric CO2 sensor based upon a Na+-conducting solid electrolyte (NASICON) was found to be greatly improved in response time and water vapor-resistance by using a binary carbonateExpand
  • 109
  • 1
Carbon Dioxide Sensor Using Sodium Ion Conductor and Binary Carbonate Auxiliary Electrode
A NASICON-basic CO 2 sensor was improved considerably when it was fitted with a Ba-Na binary carbonate electrode (Ba content: 46 atom percent). It responded to CO 2 very quickly with a 90% responseExpand
  • 104
  • 1
Sensing properties of solid electrolyte SO2 sensor using metal-sulfide electrode
Solid-state electrochemical sensor devices combined with a sodium ion conductor (Na5DySi4O12) disc and metal-sulfide sensing electrodes synthesized via solution routes have been investigated for theExpand
  • 11
  • 1
Sensing characteristics of ISFET-based hydrogen sensor using proton-conductive thick film
Abstract An FET-based microsensor using a proton conductor for detecting a small concentration of H2 in air at room temperature has been fabricated by attaching an antimonic-acid thick film (≈ 20 μmExpand
  • 14
  • 1
High-performance solid-electrolyte carbon dioxide sensor with a binary carbonate electrode
Abstract A compact solid-state CO 2 sensor based upon an Na + -conducting solid electrolyte (NASICON) can be improved drastically in response time and water vapour resistance by the use of a binaryExpand
  • 60
  • 1
Fabrication of Sm-Based Perovskite-Type Oxide Thin-Films and Gas Sensing Properties to Acetylene
Sm-based perovskite-type oxide (SmMeO3: Me = Cr, Mn, Fe, Co) thin-films could be synthesized by a wet-chemical method using an acetylacetone—Poly(Vinyl Pyrrolidone) (PVP) polymeric precursor methodExpand
  • 9
  • 1
  • PDF
Oxygen sorption and catalytic properties of La1−xSrxCo1−yFeyO3 Perovskite-type oxides
Abstract Oxygen desorption from La 1− x Sr x Co 1− y Fe y O 3 perovskite-type oxides below 850°C was examined by a temperature-programmed desorption (TPD) technique. The catalytic activities of theExpand
  • 201