• Publications
  • Influence
Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries
Materials with a one-dimensional crystal structure, such as antimony selenide, show considerable potential for making efficient thin-film solar cells.
  • 287
  • 8
Alkali activation of Australian slag cements
Abstract Investigation of alkali activation of Australian slag (AAS) was carried out using sodium silicate, sodium hydroxide, sodium carbonate, sodium phosphate, and combinations of these activators.Expand
  • 268
  • 8
Effect of elevated temperature curing on properties of alkali-activated slag concrete
This investigation is focused on the effect of curing temperature on microstructure, shrinkage, and compressive strength of alkali-activated slag (AAS) concrete. Concrete prepared using sodiumExpand
  • 179
  • 7
Resistance of alkali-activated slag concrete to carbonation
Abstract This paper presents an investigation into durability of alkali-activated slag (AAS) concrete exposed to carbonation. Two tests were used which simulated exposure of AAS concrete toExpand
  • 154
  • 7
Effect of admixtures on properties of alkali-activated slag concrete
This paper reports the results of an investigation on concrete that incorporated alkali-activated slag (AAS) as the only binder. The activators were liquid sodium silicates (4–7% Na, mass of slag)Expand
  • 198
  • 5
Degradation observations of encapsulated planar CH3NH3PbI3 perovskite solar cells at high temperatures and humidity
The stability of encapsulated planar-structured CH3NH3PbI3 (MAPbI3) perovskite solar cells (PSCs) was investigated under various simulated environmental conditions. The tests were performed underExpand
  • 488
  • 4
Dye-sensitized solar cells employing a single film of mesoporous TiO2 beads achieve power conversion efficiencies over 10%.
Dye-sensitized solar cells employing mesoporous TiO(2) beads have demonstrated longer electron diffusion lengths and extended electron lifetimes over Degussa P25 titania electrodes due to the wellExpand
  • 373
  • 4
Comparison of Solution Intercalation and Melt Intercalation of Polymer-Clay Nanocomposites
Abstract Polymer–clay nanocomposites of poly(ethylene oxide)/Na-montmorillonite (PEO/MMT) and PEO/organo-modified bentonite (B34) systems prepared via solution intercalation and melt intercalationExpand
  • 229
  • 4
Sulfate attack on alkali-activated slag concrete
Abstract This paper presents an investigation into durability of alkali-activated slag (AAS) concrete in sulfate environment. Two tests were used to determine resistance of AAS concrete to sulfateExpand
  • 215
  • 4