Learn More
and acoustic streaming X. Y. Du, Y. Q. Fu, S. C. Tan, J. K. Luo, A. J. Flewitt, W. I. Milne, D. S. Lee, N. M. Park, J. Park, Y. J. Choi, S. H. Kim, and S. Maeng Centre for Advanced Photonics and Electronics, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, CB3 0FA, United Kingdom Electronics and Telecommunications Research institute(More)
The design, microfabrication, and testing of a hybrid microdiffractive-microrefractive lens with a continuous relief that is used with a laser diode for monomode fiber coupling is discussed. The hybrid microlens with a diameter as small as 65 mum and a numerical aperture of 0.25 is fabricated directly onto a spherical surface by use of focused-ion-beam(More)
The development, during annealing, of periodic one-dimensional ripple structure has been investigated. The nanoscale ripple array was fabricated on silicon(0 0 1) crystal surface using focused ion beam (FIB). Annealing was performed isothermally in a flowing argon gas ambient at 670 8C. The morphology of the ripple before and after annealing was analyzed by(More)
Chemical vapor deposition of carbon nanotubes (CNTs) is the most promising method for fabricating CNTs based nanodevices [1] and sensors [2] because CNTs can be selectively grown by structuring the catalyst in a predefined arrangement. However, only dense aligned CNTs can be produced using transition metal catalysts (Fe, Co, and Ni) by plasma-enhanced(More)
A high precision high voltage divider has been developed for the electron beam ion trap in Shanghai. The uncertainty caused by the temperature coefficient of resistance (TCR) and the voltage coefficient of resistance has been studied in detail and was minimized to the level of ppm (10(-6)) range. Once the TCR was matched between the resistors, the precision(More)