• Publications
  • Influence
Curvature effect of SiC nanotubes and sheets for CO2 capture and reduction
The environmental crisis due to greenhouse gas CO2 emissions is motivating researchers to discover new materials and efficient technologies for CO2 capture and conversion. In this work, densityExpand
  • 17
ZYGOTE-ARREST 3 that encodes the tRNA ligase is essential for zygote division in Arabidopsis.
In sexual organisms, division of the zygote initiates a new life cycle. Although several genes involved in zygote division are known in plants, how the zygote is activated to start embryogenesis hasExpand
  • 7
Structure and mechanical properties of extruded Mg–Gd based alloy sheet
Abstract The Mg–8Gd–2Y–1Nd–0.3Zn–0.6Zr (wt.%) alloy sheet was prepared by hot extrusion technique, and the structure and mechanical properties of the extruded alloy were investigated. The resultsExpand
  • 46
Hot deformation behavior and microstructure evolution of a Mg–Gd–Nd–Y–Zn alloy
The hot deformation behavior of homogenized Mg–6.5Gd–1.3Nd–0.7Y–0.3Zn alloy was investigated during compression at temperatures of 250–400 °C and at strain rates ranging from 0.001 to 0.100 s−1.Expand
  • 11
The microstructures and corrosion properties of polycrystalline copper induced by high-current pulsed electron beam
Abstract In order to investigate the corrosion mechanism of pure metal materials containing little impurities, polycrystalline commercial pure (cp) copper was irradiated by high-current pulsedExpand
  • 32
Microstructures and mechanical properties of Mg-10Ho-0.6Zr-xNd alloys
Abstract Mg-10Ho-0.6Zr-xNd (x=0, 1, 3 and 5, mass fraction, %) alloys were prepared by metal mould casting, and the microstructures and mechanical properties were investigated. The results show thatExpand
  • 3
Oxygen reduction reaction on M-S4 embedded graphene: A density functional theory study
Abstract Based on density functional theory, M-S 4 structure embedded graphene (MS 4 /C, where M = Fe, Co and Ni) as a novel catalyst for ORR has been studied. It is found that the ORR activity of MSExpand
  • 7
Microstructure and mechanical properties of extruded Mg-6.5Gd-1.3Nd-0.7Y-0.3Zn alloy
The Mg-6.5Gd-1.3Nd-0.7Y-0.3Zn alloy ingot and sheet were prepared by casting and hot extrusion techniques, and the microstructure, age hardening behavior and mechanical properties were investigated.Expand
  • 5
Adjusting the electronic properties of silicon carbide nanoribbons by introducing edge functionalization
The structural and electronic properties of silicon carbide nanoribbons (SiC NRs) with edges passivated by hydrogen and halogens are calculated based on density functional theory. It is found thatExpand
  • 9
Wear response of metastable β-type Ti–25Nb–2Mo–4Sn alloy for biomedical applications
The wear response of a newly developed metastable β-type Ti–25Nb–2Mo–4Sn (abbreviated as Ti-2524) alloy was investigated and compared with that of (α+β)-type Ti–6Al–4V alloy. Experimental resultsExpand
  • 7