Learn More
Nitrogen pollution created severe environmental problems and increasingly has become an important issue in China. Since the first discovery of ANAMMOX in the early 1990s, this related technology has become a promising as well as sustainable bioprocess for treating strong nitrogenous wastewater. Many Chinese research groups have concentrated their efforts on(More)
The partial nitrification (PN) performance under high ammonium concentrations was evaluated in an airlift reactor (ALR). The ALR was operated for 253days with stepwise elevation of ammonium concentration to 1400mg/L corresponding nitrogen loading rate of 2.1kg/m(3)/d. The ammonium removal rate was finally developed to 2.0kg/m(3)/d with average removal(More)
Wastewater treatment sludge from a primary lead-zinc smelter is characterized as hazardous waste and requires treatment prior to disposal due to its significant arsenic and heavy metals contents. This study presents a method for the stabilization of arsenic sludge that uses a slag based curing agent composed of smelting slag, cement clinker and limestone.(More)
Floatation tailings (FT) are the main by-products of the hydrothermal sulfidation-flotation process. FT (FT1 and FT2) were obtained by treating two different neutralization sludges (NS) (NS1 and NS2). This paper quantitatively evaluated the environmental risks of heavy metals (Zn, Cd, Cu, Pb, and As) in FT versus NS. The total concentration and leaching(More)
Modified zero valent iron (ZVI) is obtained from commercial iron powder co-ground with manganese dioxide (MnO2) in intensive mechanical stress. The result indicates that the modified ZVI is very effective in arsenic sludge stabilization with a declination of arsenic leaching contraction from 72.50 mg/L to 0.62 mg/L, much lower than that of ordinary ZVI(More)
Fe(II)-EDTA, a typical chelated iron, is able to coordinate with nitric oxide (NO) which accelerates the rates and kinetics of the absorption of flue gas. However, Fe(II)-EDTA can be easily oxidized to Fe(III)-EDTA which is unable to absorb NO. Therefore, the regeneration of fresh Fe(II)-EDTA, which actually is the reduction of Fe(III)-EDTA to Fe(II)-EDTA,(More)
Chemical and microbial methods are the main remediation technologies for chromium-contaminated soil. These technologies have progressed rapidly in recent years; however, there is still a lack of methods for evaluating the chemical and biological quality of soil after different remediation technologies have been applied. In this paper, microbial remediation(More)
This study focuses on the application of hydrothermal sulfidation and floatation to treat the heavy-metal-containing sludge for recovery and stabilization. After the hydrothermal sulfidation, the sulfidation percentage of zinc and lead reach up to 85.0% and 75.4%, respectively. 33.3% of Zn, 58.9% of Pb and 68.8% of Cu can be recovered from the sludge by(More)
A novel mathematical model was developed to estimate the volumetric nitrogen conversion rates of a high-rate Anammox UASB reactor based on the packing patterns of granular sludge. A series of relationships among granular packing density, sludge concentration, hydraulic retention time and volumetric conversion rate were constructed to correlate Anammox(More)
This study focuses on the modeling and optimization of lime-based stabilization in high alkaline arsenic-bearing sludges (HAABS) and describes the relationship between the arsenic leachate concentration (ALC) and stabilization parameters to develop a prediction model for obtaining the optimal process parameters and conditions. A central composite design(More)