• Publications
  • Influence
Web warehousing: Web technology meets data warehousing
Abstract This paper discusses the concept and application of Web warehousing—the combination of data warehousing and Web technology. Data warehousing is a critical aspect of decision support systems.Expand
  • 39
  • 3
Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters
Abstract Due to the numerous interacting machining variables involved in finish turning, it is extremely difficult to assess the total machining performance (TMP) encompassing surface finish,Expand
  • 78
  • 2
It is well known that the surface roughness predicted from a theoretical model often shows a considerable difference from that obtained from the actual experimental results. However, it is extremelyExpand
  • 50
  • 2
Assessment of chip forming patterns with tool wear progression in machining via neural networks
Abstract This paper presents a new method of employing techniques of neural networks to quantify the complicated interrelationship between the change of chip breakability and that of comprehensiveExpand
  • 23
  • 1
Fit capability indices and their applications
Current methods for assuring assembly accuracy are mainly based on process capabilities and specification limits of each mating part without considering the interrelationship between the distributionExpand
  • 7
  • 1
Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 2—Assessment of Chip Forms/Chip Breakability
Abstract This paper presents recent developments in chip control research and provides major applications in tuming operations involving the use of complex grooved tool inserts. On the basis of theExpand
  • 27
  • 1
Sub-100 nm ALD-assisted nanoimprint lithography for realizing vertical organic transistors with high ON/OFF ratio and high output current
Abstract We introduced a conformal atomic-layer-deposited aluminum oxide layer to cover the imprint mold to reduce the feature size and to strengthen the mold durability. A nano-hole array patternExpand
  • 10
  • 1
  • PDF
A knowledge-based approach for designing effective grooved chip breakers — 2D and 3D chip flow, chip curl and chip breaking
This paper presents details of a knowledge-based approach for designing effective grooved chip breakers for two- and three-dimensional chip flow, curl and breaking. The design criterion used inExpand
  • 33
  • 1
Kinetic study of supercritical fluid extraction of organochlorine pesticides from ginseng by Simulink® simulation
Abstract The development of quantitative supercritical fluid extraction (SFE) methods for recovery of organochlorine pesticides from environmental samples requires three steps including analytesExpand
  • 6
A hybrid algorithm for predicting chip form/chip breakability in machining
Abstract Prediction of chip breakability for a wide range of machining conditions is a difficult task. Currently available predictive machining theories are not suitable for use in the shop floorExpand
  • 23