• Publications
  • Influence
Interface microstructure and diffusion kinetics in diffusion bonded Mg/Al joint
The interface microstructure, formation of diffusion bonded joint and regulation of atom diffusion were studied by means of scanning electron microscope (SEM), energy dispersion spectroscopy (EDS)Expand
Interface microstructure and shear strength in the diffusion brazing joint of TiC–Al2O3 ceramic composite with W18Cr4V tool steel
The diffusion brazing of TiC–Al2O3 ceramic composite with W18Cr4V tool steel is realized by using Ti and Cu filler metals at 1500°K for 1 h under a pressure of 15 MPa in a vacuum of 10–5 Pa. Thus, aExpand
Finite-element analysis of residual stresses in Al2O3-TiC/W18Cr4V diffusion bonded joints
Abstract The residual stress distribution in Al 2 O 3 –TiC/W18Cr4V diffusion bonded joints was calculated using finite element method (FEM). The effects of pressure and interlayer on the axial stressExpand
A Practical and Selective Method for the Analysis of Molybdenum in Grade T91 Tube and P91 Pipe Intended for Power Plants
ASME SA-213 T91 tubes and SA-335 P91 pipes were widely used in combined-cycle steam systems due to their greater increased temperature strength and creep behavior. In this paper, a practical andExpand