• Publications
  • Influence
Formation of integral skin polyurethane foams
Polyurethane integral skin foams comprise a low density foamed core surrounded by a high density skin of the same material, and are made in a single molding operation. Polyurethane integral skin
Creep behavior of a rotating functionally graded composite disc operating under thermal gradient
Creep behavior of a rotating disc made of isotropic functionally graded material (FGM) has been investigated. The disc under investigation is made of a composite containing silicon carbide particles
Analysis of Steady State Creep in Whisker Reinforced Functionally Graded Thick Cylinder Subjected to Internal Pressure by Considering Residual Stress
The steady state creep behavior of a functionally graded thick composite cylinder subjected to internal pressure has been analyzed in the presence of residual stress. To study the effect of residual
Centrifugal instability of semidilute non-Brownian fiber suspensions
Linear stability of the Taylor–Couette (TC) flow of semidilute non-Brownian suspension is investigated by utilizing the fiber orientation model developed by Hinch and Leal [J. Fluid Mech. 76, 187
Modeling of Creep Behavior of a Rotating Disc in the Presence of Both Composition and Thermal Gradients
The creep behavior of a rotating disc made of isotropic composite containing varying amounts of silicon carbide in the radial direction has been investigated in the presence of a thermal gradient,
PREPARATION OF 5083 Al-SiC SURFACE COMPOSITE BY FRICTION STIR PROCESSING AND ITS MECHANICAL CHARACTERIZATION
In this study, surface composite based on 5083Al matrix reinforced with nano-sized silicon carbide particles has been fabricated by Friction stir processing (FSP). Microstructure, hardness and wear
The Effect of Bulk Density on Emission Behavior of Soil at Microwave Frequencies
Dielectric constant and dielectric loss ( and ) of different soil samples with bulk densities varying from 1.3 to 2.0 gm/cm3 are determined at a single microwave frequency 9.78 GHz and at temperature
Creep behavior of rotating FGM disc with linear and hyperbolic thickness profiles
TLDR
Ahematical model has been developed to investigate steady state creep in a variable thickness rotating disc made of funct ionally graded Al-SiCp, finding that the FGM disc having hyperbolic thickness profile exhibits the lowest stresses and strain rates compared linear or constant thickn ess disc.
Optical amplification of ligand-receptor binding using liquid crystals.
TLDR
This approach to the detection of ligand-receptor binding does not require labeling of the analyte,does not require the use of electroanalytical apparatus, provides a spatial resolution of micrometers, and is sufficiently simple that it may find use in biochemical assays and imaging of spatially resolved chemical libraries.
...
1
2
3
4
5
...