• Publications
  • Influence
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
In this paper, the effects of process parameters on delamination during high-speed drilling of carbon fiber reinforced plastic (CFRP) composite are presented. The damage caused at the entrance of theExpand
  • 272
  • 11
Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model
Abstract The carbon fiber reinforced plastics (CFRP) are highly promising materials for the applications in aeronautical and aerospace industries. The delamination is a major problem associated withExpand
  • 229
  • 6
Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept
Abstract This paper presents the methodology of Taguchi optimization method for simultaneous minimization of delamination factor at entry and exit of the holes in drilling of SUPERPAN DECOR (melamineExpand
  • 81
  • 6
Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts
Hard turning with ceramic cutting tool has several benefits over grinding process such as elimination of coolant, reduced processing costs, improved material properties, reduced power consumption andExpand
  • 179
  • 6
Mechanical and physical characterization of agricultural waste reinforced polymer composites
Increasing concern about global warming, primarily due to deforestation has led development of new materials substitute to wood, which enhances optimal utilization of natural resources. NaturalExpand
  • 40
  • 6
  • PDF
Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models
Abstract Surface roughness prediction models using artificial neural network (ANN) are developed to investigate the effects of cutting conditions during turning of free machining steel,Expand
  • 217
  • 5
Machinability investigations on hardened AISI 4340 steel using coated carbide insert
Abstract The hard turning process with advanced cutting tool materials has several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, higherExpand
  • 149
  • 4
A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling
This paper describes the comparison of the burr size predictive models based on artificial neural networks (ANN) and response surface methodology (RSM). The models were developed based on three-levelExpand
  • 59
  • 4
Effect of compression ratio, CNG flow rate and injection timing on the performance of dual fuel engine operated on honge oil methyl ester (HOME) and compressed natural gas (CNG)
The present work is an effort towards the reduction of exhaust emissions from diesel engine operated in the dual fuel (DF) mode using a combination of renewable and fossil fuels. An experimentalExpand
  • 47
  • 3
Study on Some Aspects of Machinability in Unreinforced and Reinforced Polyamides
The polyamides have replaced many traditional metallic materials due to excellent property profile. Even though polyamides are produced as near net shapes, machining has to be performed in the finalExpand
  • 10
  • 3