• Publications
  • Influence
The role and utilization of pseudocapacitance for energy storage by supercapacitors
Abstract The principle of utilizing the non-Faradaic double-layer capacitance of electrode interfaces as a means of storing electrical energy was suggested and utilized in technologies initiated someExpand
  • 1,065
  • 12
A MODEL FOR ANODIC HYDROUS OXIDE GROWTH AT IRIDIUM
Abstract A detailed investigation of the electrochemistry of Ir in 0.5 M H 2 SO 4 has been used as an experimental basis for a model for oxide growth at Ir. It appears that a compact oxide (probablyExpand
  • 85
  • 3
The Effect of Film Thickness and Growth Method on Polyaniline Film Properties
The properties of polyaniline (PANI) films, grown electrochemically on Au using the potential sweep method to two different upper potential limits (type I and II) to various thicknesses in sulfuricExpand
  • 41
  • 3
A multi-technique study of compact and hydrous Au oxide growth in 0.1 M sulfuric acid solutions
Abstract The growth and reduction of compact (α-) and overlying hydrous (β-) oxide films on polycrystalline Au electrodes in aqueous 0.1 M H 2 SO 4 solutions have been investigated usingExpand
  • 58
  • 2
Chemical analysis of the ionic content of hydrous iridium oxide films
Abstract Potassium, lithium and fluoride ion analyses, together with pH measurements, have been used to elucidate the role of ions from the electrolyte solution in the charging and discharging of IrExpand
  • 45
  • 2
Impedance Characterization of Anodic Barrier Al Oxide Film Beneath Porous Oxide Layer
Electrochemical impedance spectroscopy (EIS) is a common technique used in the assessment of the thickness of anodic oxide films formed on Al and its alloys. However, it is shown here that theExpand
  • 28
  • 2
Quartz crystal microbalance measurements during oxidation/reduction of hydrous Ir oxide electrodes
QCMB data were obtained for Ir oxide films formed by standard potential cycling methods on an Ir sputter-coated quartz crystal. In sulfuric acid solutions, the mass change of the electrode in aExpand
  • 32
  • 2
High performance La0.3Ca0.7Cr0.3Fe0.7O3−δ air electrode for reversible solid oxide fuel cell applications
Abstract A novel mixed-conducting perovskite oxide (La0.3Ca0.7Fe0.7Cr0.3O3−δ, LCFCr), prepared using the combustion method, has been developed as a new air electrode material for reversible solidExpand
  • 23
  • 2
A Kinetic Study of the Oxygen Reduction Reaction at LaSrMnO3-YSZ Composite Electrodes
The primary focus of this paper is on the establishment of reliable methods for the determination of the mechanism and kinetics of the oxygen reduction reaction (ORR) at solid oxide fuel cellExpand
  • 89
  • 2