Trang N T Phan

Learn More
Electrochemical energy storage is one of the main societal challenges of this century. The performances of classical lithium-ion technology based on liquid electrolytes have made great advances in the past two decades, but the intrinsic instability of liquid electrolytes results in safety issues. Solid polymer electrolytes would be a perfect solution to(More)
Block copolymers constitute a fascinating class of polymeric materials that are used in a broad range of applications. The performance of these materials is highly coupled to the physical and chemical properties of the constituting block copolymers. Traditionally, the composition of block copolymers is obtained by 1H NMR spectroscopy on purified copolymer(More)
This work reports the conformal coating of poly(poly(ethylene glycol) methyl ether methacrylate) (P(MePEGMA)) polymer electrolyte on highly organized titania nanotubes (TiO2nts) fabricated by electrochemical anodization of Ti foil. The conformal coating was achieved by electropolymerization using cyclic voltammetry technique. The characterization of the(More)
When pressure is applied to dynamic interactive membranes consisting of micelles composed of a triblock copolymer, their morphologies can be fine-tuned. Membranes with a range of porosities are accessible which can regulate and thereby control filtration performance and also display effective autonomous healing.
Adsorption on ZnO of sodium poly(acrylate) (PAA), sodium poly(styrene sulfonate) (PSS) and a monomer surfactant [hydroxyethylidene diphosphonate (HEDP)] was investigated in suspensions initially equilibrated at pH 7. Results demonstrate interplay in the adsorption mechanism between zinc complexation, salt precipitation, and ZnO dissolution. In the case of(More)
In this work, we investigate the effects of KrF nanosecond laser ablation on poly(methyl methacrylate) (PMMA) in combination with pyrene. Three materials containing PMMA were studied: (1) one doped with pure pyrene, (2) one doped with methyl 3-(1-pyrenyl)propanoate (so called alkylpyrene derivative thereafter), and (3) one grafted with pyrene. This last new(More)
A sample pretreatment was evaluated to enable the production of intact cationic species of synthetic polymers holding a labile end-group using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. More specifically, polymers obtained by nitroxide-mediated polymerization involving the MAMA-SG1 alkoxyamine were stirred for a few hours in(More)
Electrospray ionization tandem mass spectrometry has been used to characterize the microstructure of a nitroxide-mediated poly(ethylene oxide)/polystyrene block copolymer, called SG1-capped PEO-b-PS. The main dissociation route of co-oligomers adducted with lithium or silver cation was observed to proceed via the homolytic cleavage of a C-ON bond, aimed at(More)
Matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS) is the technique of choice to achieve molecular weight data for synthetic polymers. Because the success of a MALDI-MS analysis critically depends on a proper matrix and cation selection, which in turn relates closely to the polymer chemical nature and size, prior(More)
High-field dynamic nuclear polarization (DNP) has emerged as a powerful technique for improving the sensitivity of solid-state NMR (SSNMR), yielding significant sensitivity enhancements for a variety of samples, including polymers. Overall, depending upon the type of polymer, the molecular weight, and the DNP sample preparation method, sensitivity(More)